Dovetail Jig 300mm - Loops

This jig is designed for use with routers that accept a 1/2 inch shank router bit, typically a dovetail router bit.

The jig is optimized for cutting standard through-dovetails. Specific configurations might allow for variations, but its primary design is for simultaneous pin and tail cutting.

The jig has a maximum width capacity of 300mm.

Regular cleaning of wood dust and debris is essential. Periodically lubricate the clamp mechanisms and store the jig in a dry environment.

While it produces professional results, users new to dovetail jigs may benefit from practicing on scrap wood first to become familiar with its operation and achieve optimal results.

This jig is specifically designed for 1/2 inch shank router bits. If your router uses a different size, you may need to use a collet adapter if compatible and safe, or consider a different jig.

Ensure the jig is securely mounted to the workbench and that the workpiece is clamped firmly without movement. Verify the router bit is sharp and correctly installed. Check that the jig's guides are properly aligned with the workpiece.

Check for any debris obstructing the clamp mechanism. Apply a small amount of lubricant to the clamp's moving parts. Ensure the workpiece is positioned correctly within the clamping area.

Confirm that your router accepts a 1/2 inch shank bit. Ensure the router's baseplate is compatible with the jig's mounting requirements, or use an appropriate adapter if necessary.