Best current price£147.58from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£147.58Visit shop Orac Decor White Cornice Moulding Exterior - 2440Mm X 200Mm X 160Mm
Visit shop2 offers from £147.58
View price history by clicking the chart icon.
The Orac Decor C820 Exterior Cornice Moulding is designed for homeowners and contractors looking to add architectural elegance to eaves and roofline details. Its primary benefit is the ability to soften plain building elevations with subtle curves using a durable, lightweight, and low-maintenance material. A key caveat is that while the material is resilient, it requires specific exterior-grade adhesives and proper surface preparation to ensure longevity against seasonal weather changes.
| Colour | White |
|---|---|
| Model Part Number | C820 |
| Brand | Orac Decor |
No, this specific model is designed for straight runs and corner mitres; it does not have the flexibility for curved radius walls.
The C820 comes with a white primer coating, so it is generally ready for a topcoat of high-quality exterior paint.
No, you must use an exterior-grade polyurethane adhesive designed for structural bonding to ensure it stays in place during temperature fluctuations.
You will need a miter saw, a tape measure, a sealant gun for the adhesive, and standard safety gear.
When installed correctly with appropriate exterior adhesives and maintained, polyurethane moulding is highly durable and can last for many years without degrading.
Ensure that a high-quality joint adhesive was used during the build and that the surfaces were completely dry before bonding.
Verify that the mounting surface is free from oil, grease, or peeling paint. If the surface is porous, apply a primer first.
Use a sharp, fine-toothed miter saw and a miter box to ensure the angles are accurate before applying adhesive.
For the best results, ensure the mounting surface is clean, dry, and free of dust or loose debris before beginning installation. Use an exterior-grade structural adhesive suitable for polyurethane to fix the cornice to the substrate. All joints should be treated with a specific joint adhesive to prevent hairline cracks due to thermal expansion. Once installed, if you choose to paint, ensure the use of high-quality exterior water-based paint. Care is minimal; occasional inspection of the joints and a light pressure wash (on a low setting) or a wipe-down with mild soapy water will keep the mouldings looking pristine for years.
