Vent-Axia Lo-Carbon Tempra P Heat Recovery Unit - 443312
The VA 443312 Lo-Carbon Tempra P HRU is a 320mm (wall depth) through-the-wall heat recovery unit, ...The VA 443312 Lo-Carbon Tempra P HRU is a 320mm (wall depth) through-the-wall heat recovery unit, with a pull cord for boost. Providing up to 78% heat recovery, this energy-efficient unit is designed to reduce the user’s carbon footprint, while adhering to the performance requirements outlined in the Building Regulations Approved Document F. It can be used as a continuous running MEV unit with heat recovery or a standard extractor fan with heat recovery. Nearly 75% of the heat from the extracted air is fed back into the fresh incoming air. This unit will replace any standard 4-inch extractor fan. Variable flow rates allow for quiet, low-speed continuous rates or high-speed intermittent boost rates. It is very quiet; on the 'trickle' setting it is virtually silent. The low energy consumption exceeds Building Regulations Part L, Conservation of Fuel and Power. The summer setting helps keep the dwelling cool by closing off the intake from outside. The Vent-Axia Lo-Carbon Tempra P 100mm 4" Heat Recovery Fan with Pullcord (443312) offers an efficient solution for properties requiring effective ventilation and energy conservation. It fits easily into a 100mm diameter hole, making it ideal for refurbishments, and provides impressive heat recovery of up to 78%. The Tempra P operates efficiently with a wall depth of 320mm, running continuously at 6 l/s or 9 l/s, and can boost to 15 l/s for peak performance. Its manual summer setting allows for extract-only operation, ensuring comfortable indoor temperatures in warmer months.
The VA 443312 Lo-Carbon Tempra P HRU is a 320mm (wall depth) through-the-wall heat recovery unit, with a pull cord for boost. Providing up to 78% heat recovery, this energy-efficient unit is designed to reduce the user’s carbon footprint, while adhering to the performance requirements outlined in the Building Regulations Approved Document F. It can be used as a continuous running MEV unit with heat recovery or a standard extractor fan with heat recovery. Nearly 75% of the heat from the extracted air is fed back into the fresh incoming air. This unit will replace any standard 4-inch extractor fan. Variable flow rates allow for quiet, low-speed continuous rates or high-speed intermittent boost rates. It is very quiet; on the 'trickle' setting it is virtually silent. The low energy consumption exceeds Building Regulations Part L, Conservation of Fuel and Power. The summer setting helps keep the dwelling cool by closing off the intake from outside. The Vent-Axia Lo-Carbon Tempra P 100mm 4" Heat Recovery Fan with Pullcord (443312) offers an efficient solution for properties requiring effective ventilation and energy conservation. It fits easily into a 100mm diameter hole, making it ideal for refurbishments, and provides impressive heat recovery of up to 78%. The Tempra P operates efficiently with a wall depth of 320mm, running continuously at 6 l/s or 9 l/s, and can boost to 15 l/s for peak performance. Its manual summer setting allows for extract-only operation, ensuring comfortable indoor temperatures in warmer months.