Best current price£3.50from eBay
Shopping.co.uk recommended and popular offers
eBay£3.50Visit shop Etronix Female XT-60 To Male EC3 Plug Connector Adaptor ET0842EC3 XT60 Lead wire
Visit shop3 offers from £3.50 - £5.75
View price history by clicking the chart icon.
This Etronix adaptor is designed for hobbyists needing to connect devices with XT-60 female connectors to those with EC3 male connectors. Its primary benefit is enabling compatibility between different battery and charger systems in Radio Control models and Scalextric applications. A potential consideration is ensuring correct polarity during connection to avoid damage.
| Model Part Number | ET0842EC3 |
|---|---|
| Brand | Etronix |
This adaptor allows you to connect components that use different standard connectors, specifically converting a female XT-60 plug to a male EC3 plug.
No, this is a plug-and-play adaptor and does not require any soldering or specialized tools for connection.
It is suitable for various hobby applications including Radio Control models (cars, planes, boats), Scalextric, and Hornby systems.
Always pay close attention to the polarity markings (+ and -) on both the connector and the device you are connecting to ensure a correct positive-to-positive and negative-to-negative connection.
Yes, if your battery has a female XT-60 connector and your charger has a male EC3 input (or vice-versa with a mating adaptor), this can be used to connect them.
Ensure that the connectors are fully inserted and that there is no dirt or debris preventing a solid contact. If the issue persists, the adaptor or the mating connector may be worn and could require replacement.
Check that both the XT-60 and EC3 connections are fully seated. Verify that the battery or power source is charged and functional. Double-check that the polarity is correctly matched between all connected components.
Ensure the connections are secure and that there is no debris within the connectors. Inspect the adaptor and the connected components for any signs of damage or loose pins.
If the connection feels loose, it may indicate wear on the adaptor or the mating connector. Inspect for any damage and consider replacing the adaptor if it no longer provides a secure fit.
Setup: To use the adaptor, simply plug the female XT-60 end into the corresponding male XT-60 connector on your battery or power source. Then, plug the male EC3 end into the corresponding female EC3 connector on your ESC, charger, or accessory. Always ensure that the polarity (+ to +, - to -) is correct before connecting to prevent damage to your electronics.
Compatibility: This adaptor is designed to bridge the XT-60 and EC3 connector standards. It is commonly used with LiPo batteries, chargers, ESCs, and other accessories in the Radio Control (RC) hobby, including cars, planes, and boats, as well as with Scalextric and Hornby model railway systems.
Care: Keep the connectors clean and free from dirt and debris. Store the adaptor in a dry place when not in use. Periodically check the connectors for any signs of wear or damage. If the connectors become loose, they may need to be replaced.
