Bedec Interior Flex Flexible Wall Ceiling Paint - White - 2.5L

The main advantage is its elastomeric property, which allows it to stretch and flex with the substrate, effectively bridging and preventing hairline cracks caused by minor movement.

No, Bedec Interior-Flex is specifically formulated for interior walls and ceilings only. It is not designed for exterior use.

The paint is touch dry in under 2 hours, but you must wait at least 4 hours before applying a subsequent coat.

It provides a smooth, low-sheen finish, which is subtle and helps to hide minor surface imperfections.

It is suitable for most interior walls and ceilings, including plaster, plasterboard, and previously painted surfaces, provided they are properly prepared.

Once fully cured, the surface can be gently cleaned with a soft, damp cloth. Avoid abrasive cleaners.

It is designed to bridge and cover *hairline* cracks. For larger cracks, you will need to repair them with a suitable filler before applying the paint for a smooth finish.

Ensure the surface was properly prepared, clean, dry, and free from dust, grease, or contaminants. Check if a suitable primer was used, especially on new or problematic surfaces. Re-apply after thorough surface preparation.

The cracks may have been wider than hairline, or the paint may not have been applied thickly enough to bridge them. Ensure cracks are filled if wider than hairline, and apply a second coat of Interior-Flex, ensuring even application to fully cover the area.

Ensure the paint was stirred thoroughly. Apply with even, consistent strokes, avoiding over-spreading. Use a good quality brush or roller suitable for emulsions. Allow proper drying times between coats. If spraying, ensure correct pressure and tip size are used.

In very warm or dry conditions, the paint may start to 'skin over' before application. Work in smaller sections and ensure you maintain a 'wet edge' during application. Avoid painting in direct sunlight or extreme temperatures.