Best current price£4.75from The Range
Shopping.co.uk recommended and popular offers
The Range£4.75Visit shop Jcp Fixings Sds+ Drill Bit - 6.5Mm X 210Mm, 2 Cutting Edges - Silver
Visit shop8 offers from £4.75 - £26.90
View price history by clicking the chart icon.
The JCP Fixings SDS+ Drill Bit is designed for professional contractors and DIY enthusiasts who require reliable, long-reach performance when drilling into concrete and masonry. Its primary advantage is the robust two-cutting-edge design that promotes faster penetration and improved accuracy for deep-hole applications. While highly effective for heavy-duty masonry work, users should note that the 450mm length requires a steady hand and proper technique to prevent bit wander during the initial stages of drilling.
| Model Part Number | 1427662 |
|---|---|
| Brand | JCP Fixings |
No, this bit is specifically engineered for masonry and concrete. Using it on metal will ruin the cutting edges.
It refers to the cutting diameter of the drill tip, which determines the size of the hole you will produce.
Yes, it requires a drill with an SDS+ chuck. It will not fit in a standard drill bit chuck.
This bit is designed for masonry. If you hit metal rebar, the carbide tip may chip, so it is best to avoid drilling directly into metal reinforcement.
The 450mm length is specifically provided to allow the user to reach through thick walls or deep anchoring points that standard length bits cannot reach.
Check that the bit is fully seated in the SDS+ chuck and ensure the shank is not damaged or debris-filled.
Ensure the hammer action is engaged on your drill. If the drill is in rotation-only mode, it will not penetrate concrete efficiently.
Withdraw the bit while the drill is spinning to clear concrete dust and debris from the flutes.
To set up the bit, ensure your hammer drill is set to 'Hammer' mode and insert the bit into the SDS+ chuck until it clicks into the locked position. Verify that it is properly seated before starting the tool.
