Setup, Compatibility & Care
To ensure the best performance from Stormsure TUFF Tape, follow these steps for application:
- Clean: Ensure the surface is free of dirt, oil, and dust. Use an alcohol-based cleaner if necessary and ensure it is fully dry.
- Cut: Measure the rip and cut a piece of tape at least 1cm larger than the damage on all sides.
- Apply: Peel the backing carefully and center the tape over the rip.
- Press: Firmly press the tape down, working from the center outward to push out any trapped air bubbles for a complete seal.
For best results on clothing, avoid washing the garment for at least 24 hours after application to allow the adhesive to fully cure. This tape is compatible with most fabrics, plastics, and rubbers, but it is recommended to test a small, inconspicuous area if applying to delicate or specialized synthetic materials.