Best current price£53.99from Cycles U.K.
Shopping.co.uk recommended and popular offers
Cycles U.K.£53.99Visit shop Dynaplug Air Tubeless Road Tyre Repair and Inflation Kit ONE SIZE Black - Cycles UK
Visit shop3 offers from £53.99 - £59.99
View price history by clicking the chart icon.
The Dynaplug Air is an all-in-one solution for cyclists with tubeless tires, offering rapid repair and immediate inflation. It’s designed for quick fixes on the go, allowing you to seal punctures and reinflate your tire in minutes without removing it. A key consideration is that this specific 'Road' version is optimized for narrower tires, and a separate 'MTB Air' version exists for wider mountain bike tires. This kit provides a sealant-friendly plug that bonds permanently, a brass tip safe for rims and tape, and utilizes CO2 for instant inflation.
| Model Part Number | DP0016 |
|---|---|
| Brand | Dynaplug |
A 16g CO2 cartridge typically provides enough air to inflate a road bike tire to a rideable pressure. For larger MTB tires, a 20g cartridge or multiple cartridges might be needed.
The Dynaplug creates a permanent bond with the tire and works with sealant to provide a lasting repair. However, for very large punctures, it might be a temporary fix until a more permanent solution can be applied.
No, the Dynaplug Air is specifically designed for tubeless tires. It repairs punctures directly in the tubeless casing.
The 'Road' version has a shorter insertion tube to prevent it from bottoming out in narrow road bike tires. The 'MTB Air' version has a longer insertion tube suitable for wider mountain bike tires.
No, one of the key benefits is that you do not need to remove the tire or wheel from your bike.
You can trim the excess plug tail with a sharp knife or cutters after the tire has been inflated and the plug has set.
CO2 is safe when handled properly. However, cartridges are under pressure and can cause cold burns if handled carelessly. Always read the instructions and wear protective gear, such as gloves, when using CO2.
Ensure the CO2 cartridge is fully screwed in and punctured. Check that the plug is fully seated in the tire. Verify the CO2 cartridge is not empty.
Ensure the puncture is clean and free of debris. Try inserting the plug with a slightly different angle. For larger holes, multiple plugs might be necessary, or the hole may be too large for repair with this method.
Check the connection between the air valve body and the CO2 cartridge. Ensure the air hose connection is secure if using it for inflation only. The tire valve itself may need attention.
Do not force. Gently twist the insertion tube while pulling back. Ensure no debris is obstructing the insertion path.
Setup:
Compatibility:
Care:
