Mini Ball Valve - 10mm x 1/4" Compression x Male Iron
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This mini ball valve is designed for professional plumbers and DIY enthusiasts needing precise, compact isolation control in residential or commercial water and heating systems. It offers the key benefit of reliable, quarter-turn shut-off in exceptionally tight spaces where standard valves would be too bulky; however, users should note that the 1/4" male iron thread requires compatible NPT or BSP adapters depending on the specific system requirements.
All features
| Model Part Number | 5056866123631 |
|---|---|
| Brand | Xcel Home |
Extended Product Information
FAQs
Is this valve suitable for gas lines?
No, this product is designed for plumbing and heating water systems and should not be used for gas applications.
Can I use this on PEX pipe?
While the compression end is designed for copper, it may work with PEX if a proper internal pipe insert is used to maintain roundness.
Does it come with an olive and nut?
Yes, the compression end includes the necessary nut and olive for installation.
What is the maximum pressure rating?
This valve is intended for standard residential and light commercial plumbing pressures; always consult local building codes for specific pressure limits in your area.
Is the handle removable?
The handle is secured by a fastener and can generally be removed for clearance, though it is not designed for frequent removal.
Troubleshooting
Minor weeping at the compression joint
Tighten the compression nut by a quarter-turn; if weeping persists, ensure the pipe is inserted straight and the olive is not damaged.
Handle is stiff to turn
Verify that no debris is lodged in the lever mechanism; ensure no external pressure is putting a bind on the valve body.
Leakage from the threaded male end
Remove the fitting, re-apply fresh PTFE tape, and ensure the valve is tightened sufficiently into the female housing.
Pros and Cons
Pros
- Ideal for installation in cramped cabinets or service boxes
- Reliable quarter-turn mechanism prevents seizing common with gate valves
- Chrome-plated finish offers enhanced rust resistance
- Simple compression installation reduces the need for specialized tools
Cons
- Not suitable for high-pressure industrial steam applications
- Requires proper thread sealing tape for the male iron connection
- Compact lever may be harder to grip for users with limited mobility
Setup, Compatibility & Care
To install, ensure the 10mm pipe end is cut cleanly and deburred before inserting it into the compression fitting. Tighten the nut firmly until the olive compresses against the pipe to create a watertight seal. For the 1/4" male iron side, use PTFE tape (plumber's tape) on the threads to prevent leaks before threading into the mating female component. Regularly check for signs of moisture around the compression nut after the initial install. To maintain the valve's longevity, perform a full open-and-close cycle at least once every six months to prevent lime scale accumulation on the ball.