Best current price£15.88from B&Q
Shopping.co.uk recommended and popular offers
B&Q£15.88Visit shop B&Q - M4 X 32mm Hollow Wall Anchor ( Pack Of: 50 ) Plasterboard Fixings Cavity Wall Anchors Heavy Duty Metal Plugs Molly
Visit shop7 offers from £15.88 - £22.48
View price history by clicking the chart icon.
This DIYUK M6 X 53mm Hollow Wall Anchor pack is designed for DIY enthusiasts and professionals needing a robust solution for mounting items on plasterboard, wallboard, and paneling. Its key benefit is providing a secure, permanent threaded anchor in cavity walls, offering high grip and stability. A potential caveat is the need for a pre-drilled hole of the correct size for optimal performance.
| Brand | DIYUK |
|---|
The specific weight capacity can vary based on the thickness and condition of the plasterboard. Refer to the manufacturer's technical specifications for detailed load ratings, but generally, these heavy-duty anchors are designed for significant loads.
For the M6 x 53mm anchor, a drill bit size of approximately 10-12mm is typically recommended. Always check the product packaging or manufacturer's guidelines for the precise size.
While they are designed for plasterboard, the 53mm length might be excessive for very thin (e.g., 9.5mm) plasterboard. Ensure the anchor legs have sufficient space to deploy behind the board. For thinner boards, shorter anchor variants might be more suitable.
To remove the anchor, unscrew it completely. The legs will retract. You may need to push the collapsed anchor body back into the wall cavity or carefully pry it out. The hole will likely need patching afterward.
These are heavy-duty anchors suitable for significant loads, but for very heavy appliances like large ovens or boilers, it is always recommended to locate wall studs or use specialized fixings designed for extreme weight.
Standard wall plugs are for solid walls and expand by pushing into the material. Hollow wall anchors like this one are specifically for hollow materials (like plasterboard) and expand by deploying legs or wings behind the board, creating a much stronger hold in such applications.
The hole may be too large. Ensure you used the correct drill bit size. Try a slightly larger anchor if available or repair the hole and re-drill.
Ensure the anchor is fully inserted into the hole before tightening the screw. Check that the screw is not stripped and is engaging with the anchor's nut properly.
The anchor might not be fully engaged behind the wall. Gently remove the item and tighten the screw further, ensuring the legs are spread. Verify the weight of the item does not exceed the anchor's load capacity.
Setup:
Compatibility:
Care:
