XL Joinery Internal White Primed Pattern 10 Fire Door - 2040 X 726 X 44mm

A half hour fire rated door is designed and tested to resist the passage of fire for at least 30 minutes, providing crucial time for evacuation and limiting fire spread.

While hanging doors can be a DIY task, fire doors have specific installation requirements to maintain their rating. Professional installation is strongly recommended to ensure compliance and safety.

Use a high-quality interior paint. Ensure the paint is compatible with primed surfaces and follow the paint manufacturer's application guidelines. Avoid painting over any intumescent seals.

Yes, XL Joinery offers matching glazed doors (in clear or obscure glass) and rebated door pairs in the Pattern 10 style, allowing for a consistent look throughout your home.

The product title specifies the dimensions. For this listing, the door is 2040mm high x 726mm wide x 44mm thick.

Fire doors have specific limits on how much they can be trimmed to maintain their integrity. Always consult the manufacturer's guidelines or a professional installer before trimming.

Check for obstructions around the frame or hinges. Ensure hinges are correctly installed and tightened. The frame may be out of square, requiring adjustment or shimming.

Contact the manufacturer or a qualified installer for replacement intumescent fire seals. Do not operate the door if fire seals are compromised.

Lightly sand the surface with fine-grit sandpaper and apply an additional thin coat of high-quality primer, followed by your chosen topcoat.

Ensure you are using a suitable paint for interior doors and a high-quality brush or roller. Apply thin, even coats and allow adequate drying time between coats.