Pack of 2 Brick Buster Plates. The brick buster plate is designed to cover damaged brickwork where...Pack of 2 Brick Buster Plates. The brick buster plate is designed to cover damaged brickwork where a cable enters or exits the exterior of a building. It can be installed with screws or by gluing into position with silicone sealant. The plate helps protect the cable from damage and when installed with silicone will help prevent the ingress of water into the hole in the brickwork. Colour - Orange. Size: 10cm x 10cm.
The Loops Brick Buster Plate is designed for homeowners and DIY enthusiasts needing to neatly cover and protect cable entry/exit points in brickwork. Its key benefit is providing a clean finish while safeguarding cables from exterior damage and preventing water ingress when properly sealed. A potential caveat is that it requires separate fixing materials like screws or silicone sealant.
All features
Brand
Loops
Extended Product Information
FAQs
What materials are needed for installation?
You will need screws or exterior-grade silicone sealant, which are not included with the product. A drill may also be required for screw installation.
What color is the Brick Buster Plate?
The plate is orange.
What are the dimensions of the plate?
The plate measures 10cm x 10cm.
Can I paint the plate to match my house color?
While not specifically tested for painting, most exterior-grade paints should adhere to the plastic surface. Clean and prime the surface before painting.
How many plates come in a pack?
This product is a pack of 2 Brick Buster Plates.
Is this product suitable for internal use?
While it can be used internally, its design and materials are optimized for exterior weather conditions and cable protection.
Troubleshooting
Plate not adhering well
Ensure the surface is clean, dry, and free of dust or loose mortar before applying silicone sealant. Use a high-quality exterior-grade silicone sealant.
Water ingress still occurring
Re-apply silicone sealant around the edges of the plate and where the cable enters the plate. Ensure a continuous, unbroken seal.
Screws not holding securely
Use appropriate wall anchors if installing into softer brick or mortar. Ensure pilot holes are correctly sized for the screws being used.
Pros and Cons
Pros
Improves the appearance of exterior walls by hiding cable entry points.
Offers physical protection to cables exposed to the elements.
Helps prevent water damage to the building's interior when sealed correctly.
Provides flexibility in installation methods (screws or adhesive).
Durable construction suitable for outdoor use.
Cons
Requires separate purchase of screws or silicone sealant for installation.
The orange color may not match all exterior aesthetics.
Does not include mounting hardware.
Effectiveness against water ingress depends on proper sealing technique.
Setup, Compatibility & Care
Setup:
Ensure the area around the cable entry point is clean and dry.
Position the Brick Buster Plate over the hole, ensuring the cable passes through the center.
For screw installation: Mark pilot holes through the plate, drill if necessary, and secure with appropriate screws (not included).
For silicone installation: Apply a generous bead of exterior-grade silicone sealant around the inner edge of the plate and the cable entry. Press the plate firmly into position.
Seal the outer edges of the plate to the brickwork with silicone sealant for maximum water protection.
Compatibility:
Compatible with most standard exterior cables (satellite, aerial, network, power).
Suitable for installation on brick, masonry, and similar exterior wall surfaces.
Care:
Clean the plate periodically with a damp cloth to remove dirt or debris. Avoid abrasive cleaners that could damage the surface.