PlastiKote Stone Touch Spray Paint - Manhattan Mist - Grey

The paint is touch dry in approximately 2 hours and thoroughly dry in 4-6 hours. Allow ample time for drying before handling or applying a topcoat.

It is suitable for ceramic, china, glass, metal, papier mache, stone, terracotta, wicker, and wood.

Yes, you can layer this paint over a base coat of Satin Super for a different effect. For enhanced protection and to preserve the finish, apply PlastiKote Stone Touch Clear Sealer.

If the nozzle becomes blocked, try clearing it carefully with a pin or by soaking the nozzle head in a suitable solvent. If unblocking is not possible, replace the can.

One 400ml can provides approximately 2.23m² of coverage, depending on the application thickness and surface porosity.

While it can be used on various materials, for outdoor items or those requiring frequent handling, applying a protective clear sealer like PlastiKote Stone Touch Clear Sealer is recommended for enhanced durability and weather resistance.

Ensure the can is shaken adequately before and during use. Apply in thin, even coats from a consistent distance (approx. 25-30 cm). Check nozzle for blockages; if blocked, clean with a solvent or replace the can.

You may be holding the can too close to the surface or applying the paint too thickly. Maintain a consistent spray distance and use lighter, multiple coats.

The surface may not have been adequately prepared. Ensure it was clean, dry, and free from grease or dust. Lightly sanding glossy surfaces before painting can improve adhesion.

Check if the nozzle is clogged. Try clearing it with a pin or by soaking it in a suitable solvent. Ensure the can is upright and the nozzle is properly attached.