Hultafors CLP30 Chalk Line - 30m

Best current price£33.66from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£33.66Visit shop B&Q - Clp30 Chalk Line 30M (100Ft) Multi Colour (One Size)
Visit shop
Best current price£33.66from B&Q
Shopping.co.uk recommended and popular offers
B&Q£33.66Visit shop B&Q - Clp30 Chalk Line 30M (100Ft) Multi Colour (One Size)
Visit shop1 offer from £33.66
View price history by clicking the chart icon.
The Hultafors CLP30 Chalk Line is a professional-grade marking tool designed for contractors and tradespeople who require precision layout lines over long distances. Featuring a 30-meter high-retention line and a 3:1 gear ratio for rapid retraction, it excels in productivity and accuracy on construction sites; however, users should be aware that it requires manual line tautness management to prevent sagging over its maximum length.
| Model Part Number | UTTK3737_1 |
|---|---|
| Brand | Hultafors |
The Hultafors CLP30 comes with a 30-meter long line.
The reservoir is designed to hold up to 100g of chalk.
Yes, the line is replaceable; ensure you use a similar diameter cotton/polyester blend for optimal chalk retention.
No, the chalk must be purchased separately.
It means the line retracts three times faster than a standard 1:1 geared chalk line.
The housing is water-resistant, but it is not submersible. Keep the chalk dry to prevent clumping.
Ensure the reservoir is not overfilled, as air space is needed for the line to tumble in the chalk powder. Shake the unit before use.
Check for chalk build-up around the crank axle. Clean the exterior and ensure no debris has lodged in the gear mechanism.
Verify that the hook is properly secured into the designated slot on the bayonet cap and that the crank is locked.
To set up the CLP30, unlock the bayonet cap, fill the reservoir with your preferred chalk, and ensure the cap is twisted into the locked position before use. Maintain the tool by occasionally clearing dust from the crank mechanism. The braided cotton/polyester line can be cleaned with water if it becomes clogged with debris, but ensure it is completely dry before winding it back into the casing to prevent clumping or mold growth inside the reservoir. Avoid using abrasive, heavy-grit chalks which can wear down the internal gearing prematurely.