Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and completely smooth. Remove any dust, grease, or old adhesive.
- Measure and cut the film to the desired size using the grid lines on the back. Allow a slight overlap for edges.
- Peel back a small section of the backing paper from one edge.
- Carefully align the film with the edge of the surface and press down.
- Slowly peel off the remaining backing paper while smoothing the film onto the surface with a squeegee or cloth, working from the center outwards to avoid air bubbles.
- Trim any excess film with a sharp craft knife.
Compatibility:
This film is designed for application on any smooth, clean, flat surface. It is compatible with furniture, kitchen cabinets, shelves, tabletops, doors, and walls. Avoid applying to textured, uneven, or porous surfaces, as adhesion will be poor and removal may cause damage.
Care:
The film is water-repellent and can be cleaned with a damp cloth. For tougher stains, use a mild detergent. Avoid abrasive cleaners or harsh chemicals, which can damage the surface. For removal, use a hairdryer on a low to medium heat setting or warm water to soften the adhesive before gently peeling the film away.