Aeotec MultiSensor - ZWA024-C
Best current price£111.76from OnBuy.com
Best offers
Shopping.co.uk recommended and popular offers
OnBuy.com£111.76Visit shop Zwa024-C Multisensor Multi Sensor 1220000016873
Visit shopOnBuy.com£111.76Visit shop One Offer
1 offer from £111.76
View price history by clicking the chart icon.
OnBuy.comZwa024-C Multisensor Multi Sensor 1220000016873
Free delivery in 1–3 days
£111.76
Visit shop
Product Information
Full details
The Aeotec MultiSensor 7 is an all-in-one environmental monitoring solution designed for home automation enthusiasts who need precise data on motion, climate, and light conditions. Its primary benefit is the consolidation of six unique sensors into a single Z-Wave Plus V2 unit, significantly reducing clutter in your smart home network. While it offers industry-leading efficiency and security, users should note that the device requires a compatible Z-Wave hub to function, and constant power via USB is recommended if you wish to avoid frequent battery replacements during heavy use.
All features
| Model Part Number | ZWA024-C |
|---|---|
| Brand | Aeotec |
Extended Product Information
FAQs
Does the MultiSensor 7 work outdoors?
While the sensor is primarily designed for indoor use, it can be used in sheltered outdoor areas, provided it is protected from direct rain and extreme moisture.
Can I power it via USB and keep batteries in?
Yes, you can use batteries as a backup power source while connected to USB, but the device will prioritize the USB power.
How often should I change the batteries?
Battery life varies based on reporting settings, but typically lasts 6-12 months under standard conditions.
Is it compatible with SmartThings or Home Assistant?
Yes, provided you have a Z-Wave hub or USB Z-Wave stick that supports Z-Wave Plus V2 devices.
What is the maximum range of the Z-Wave 700 series?
The Z-Wave 700 series offers a transmission range of up to 100 meters in open space, though interior walls will reduce this range.
Troubleshooting
Sensor is not being detected by the hub
Ensure the device is within range of the controller and perform a factory reset by holding the button for 20 seconds before attempting to re-include.
Rapid battery drain
Adjust the 'wake-up' interval and sensor reporting frequency in your hub settings, as frequent reports will consume battery life much faster.
Motion sensor triggers false positives
Ensure the device is not pointing at heat sources such as radiators, air vents, or direct sunlight.
Pros and Cons
Pros
- Comprehensive environmental data monitoring
- Compact and unobtrusive design
- Improved battery life due to 700 series chipset
- Enhanced security via S2 encryption
- Easy pairing with SmartStart
Cons
- Requires a Z-Wave hub for operation
- Battery life may be limited if polling settings are too aggressive
- Higher power consumption during firmware updates or heavy reporting
- UV sensor requires careful placement for accurate outdoor readings
Setup, Compatibility & Care
To set up your MultiSensor 7, ensure your Z-Wave controller is in inclusion mode, then use the provided QR code for SmartStart integration. For optimal performance, always perform the initial inclusion process within 10 feet of your hub.
Compatibility: This device is compatible with any certified Z-Wave controller supporting S2 security.
Care Instructions:
- Clean the lens gently with a soft, dry cloth to prevent smudges that could affect motion detection.
- If using battery power, avoid lithium batteries that are near expiration to maintain stable signal transmission.
- When powering via USB, use a 5V adapter and ensure the cable is routed away from high-traffic areas to prevent damage to the micro-USB port.