Hycote Colour Spray Paint - Black - 400mL

This Hycote High Heat Paint is designed to withstand temperatures up to 100°C.

This paint is specifically formulated for metal automotive components. Compatibility with plastics may vary, and testing on a small, inconspicuous area is recommended. For best results, use on intended metal surfaces.

Drying times can vary based on temperature, humidity, and application thickness. Typically, recoat times are around 15-20 minutes, but full curing may take up to 24 hours. Refer to the can's instructions for specific guidance.

While not always mandatory, using a compatible Hycote primer is highly recommended for optimal adhesion, durability, and a professional finish, especially on bare metal or previously painted surfaces.

It is generally recommended to apply 2-3 thin, even coats for best coverage and durability. Allow the recommended drying time between each coat.

Yes, provided the existing paint is sound and clean. Lightly abrade the surface for better adhesion, and ensure it is free from contaminants before applying the Hycote paint.

The can contains 400mL of paint.

Ensure the can is shaken vigorously and frequently during use. Check that the nozzle is not clogged; if so, remove and clean it according to instructions. Hold the can at the recommended distance.

Applied too thickly or held too close to the surface. Apply in thinner coats and allow adequate drying time between applications. Maintain the recommended spray distance.

Surface was not properly prepared (not clean, dry, or de-greased) or primer was not used. Ensure the surface is meticulously clean and use a compatible Hycote primer for optimal adhesion.

The component may exceed the 100°C temperature limit, or the paint was not applied correctly/fully cured. Ensure application follows guidelines and that the component operates within the paint's rated temperature range.