Best current price£10.68from eBay
Shopping.co.uk recommended and popular offers
eBay£10.68Visit shop Shielded CAT6A STP RJ45 Field Terminated Plugs Ends Connectors Plastic [4 Pack]
Visit shop
B&Q£11.99Visit shop B&Q - Shielded Cat6A Stp Rj45 Field Terminated Plugs Ends Connectors Plastic (4 Pack)
Visit shop2 offers from £10.68 - £11.99
View price history by clicking the chart icon.
This 4-pack of kenable Shielded CAT6A STP RJ45 Field Terminated Plugs is designed for professionals and DIY enthusiasts seeking to create reliable, high-performance network connections. The key benefit is superior signal integrity due to the shielded metal RJ45 connectors, reducing interference in demanding environments. A potential caveat is that field termination requires specific tools and a degree of technical skill for optimal results. These plugs offer robust connectivity for custom-length network cables.
| Series | CAT6A |
|---|---|
| Model Part Number | CAP-012839 |
| Brand | kenable |
STP (Shielded Twisted Pair) connectors, like these, have a metal housing and shielding to protect against electromagnetic interference (EMI) and radio frequency interference (RFI). UTP (Unshielded Twisted Pair) connectors lack this shielding and are more susceptible to interference.
While CAT6A is designed for higher bandwidth, these STP connectors *can* be used with CAT5e or CAT6 shielded cables, provided the wire gauge compatibility is met. However, you will be limited to the performance specifications of the lower-category cable.
You will typically need a network cable stripper, a crimping tool specifically for RJ45 connectors, and wire strippers or a punch-down tool to prepare the individual wires.
Both standards are interchangeable as long as you use the same standard at both ends of the cable. T568B is more common in North America. Consult your network plan or IT administrator if unsure.
Field-terminated connectors are generally considered single-use installations. While you might be able to detach and re-crimp, it can compromise the integrity of the connector and cable, and is not recommended for reliable performance.
Category 6A (CAT6A) is designed to support 10 Gigabit Ethernet (10GbE) speeds up to a maximum distance of 100 meters (328 feet).
Double-check the wiring order against the T568A or T568B standard. Ensure all wires are fully seated in their channels and that the shield is properly making contact with the metal plug. Re-crimp the connector.
Verify that the shielding is intact and properly connected to the plug. Ensure the cable jacket is properly seated within the strain relief boot. Check for any kinks or damage to the cable itself.
Ensure you are using the correct RJ45 plug type. Verify that the plug was crimped correctly and no pins are bent or damaged. Check the network port for obstructions.
Ensure the outer jacket of the cable is properly seated inside the boot before crimping. Some boots may require a slight twist or push to secure.
Setup:
These are field-terminated plugs, meaning they are assembled onto the cable at the point of installation. You will need:
Steps typically involve: stripping the outer jacket, untwisting and arranging the internal wires according to the T568A or T568B standard, inserting them into the plug's channels, and then crimping the connector securely using the tool. Ensure the shielding is properly connected to the plug's metal housing.
Compatibility:
Care:
Store connectors in a clean, dry place. Avoid exposure to excessive moisture or extreme temperatures. When handling, be careful not to damage the internal pins or the shielding.
