Cuprinol UV Guard Decking Oil - Walnut - 2.5L

A 2.5 litre can covers up to 20m² with two coats when brush-applied or 1 coat spray applied. Coverage can vary depending on the application method and the condition and nature of the surface.

Drying time is up to 6 hours. This can vary depending on the nature of the surface and the weather conditions.

Cuprinol UV Guard Decking Oil is suitable for most types of wooden decking, including hardwoods and softwoods. Ensure the wood is clean and dry before application.

The frequency of reapplication depends on the exposure of your deck to the elements and foot traffic. Typically, a reapplication every 1-2 years is recommended to maintain protection and appearance.

It is best to remove any existing stain or paint before applying the decking oil for optimal penetration and adhesion. The product is designed to work best on bare, prepared wood.

If rain occurs before the oil has had sufficient time to dry (up to 6 hours), it may wash away the finish. You may need to reapply the affected areas once the deck is dry. Avoid applying in forecast rain.

Yes, the Walnut tint is designed to revitalize and enhance the color of weathered wood, providing a richer, warmer tone. Test on an inconspicuous area first to ensure you are happy with the final color.

This can occur if the oil was not stirred properly or if applied too thinly. Ensure thorough stirring before and during use. Apply subsequent coats evenly, ensuring consistent coverage. If the issue is severe, consider a light sanding and reapplication.

The wood may be too saturated with moisture or have a previous finish that is preventing absorption. Ensure the wood is completely dry. If a previous finish is present, it may need to be stripped or sanded down to allow the oil to penetrate.

This usually indicates that an excessive amount of oil was applied, or it was applied in conditions of high humidity or low temperature, hindering proper drying. Try wiping off any excess oil with a clean cloth. In some cases, a light sanding may be required.

The wood may require a more intensive cleaning or restoration process before oiling. Use a deck cleaner and brightener to remove ingrained dirt and revive the wood's natural tone. Ensure all cleaning agents are rinsed off thoroughly.