Control Knob - Silver

This control knob is specifically designed for the Lamona Gas Hob model LAM1006 and is also compatible with original part numbers 7754786357 and 7754786324.

This is a premium quality compatible replacement part made by SPARES2GO, designed to function as a direct replacement for the original Lamona control knob.

Simply pull off the old knob, align the new knob with the gas valve spindle, and push it firmly into place. Ensure the hob is off and cool before starting.

The control knob is made from a premium quality plastic with a silver and black finish.

First, double-check that your hob model is LAM1006 and that the part numbers match. Ensure you are aligning the knob correctly with the D-shaped or flattened spindle.

This knob is specifically designed and tested for Lamona Gas Hobs. It is not recommended for use on other brands or models unless explicitly stated as compatible.

Clean with a soft, damp cloth. Avoid abrasive cleaners. A mild detergent solution can be used for tougher marks, followed by a wipe with a damp cloth and then drying.

Verify that your hob model is LAM1006 or that the part numbers match your original. Check the orientation of the spindle and the internal fitting of the knob; it may require alignment with a D-shaped or flattened spindle.

Ensure the knob is pushed fully onto the spindle. If the spindle is worn or the knob internal fitting is slightly larger, consider a small piece of tape or shim on the spindle for a tighter fit, though this is not a standard fix.

Ensure there are no obstructions around the spindle or hob fascia. Clean the spindle gently if any debris is present. If the knob itself is warped or defective, replacement may be necessary.