Sea Glass Backsplash Tiles - YÖL - PXV9T

Each pack contains four 10-inch by 10-inch peel-and-stick tiles.

These tiles adhere best to smooth, clean, and dry surfaces like painted drywall, smooth existing tiles, or laminate. Avoid textured or unpainted surfaces.

Yes, but only if there is a minimum clearance of 15 inches above the stovetop to prevent heat exposure and potential damage. Always check your stove's manual for specific heat clearance requirements.

Wipe the tiles clean with a damp cloth. For tougher spots, use a mild soap and water solution, then wipe dry.

They are water-resistant and suitable for kitchen backsplashes, but they are not fully waterproof. Avoid prolonged submersion in water.

Yes, the 10x10 inch panels can be easily cut with scissors or a utility knife to fit your specific dimensions.

They are designed for peel-and-stick application and can often be removed, though removal may depend on the surface and how long they have been applied. Some residue may remain.

Ensure the wall surface is thoroughly cleaned, dried, and free of dust or grease. For existing tiles, make sure they are smooth and not heavily textured. Press firmly after application.

Carefully lift the edge of the tile and gently smooth it down, pushing air towards the nearest edge. If the adhesive is compromised, you may need to reapply with a suitable temporary adhesive if available.

Use a sharp utility knife or strong scissors. Score the tile multiple times along your cutting line before attempting to snap or cut through it completely for a cleaner edge.

Verify that there is at least 15 inches of clearance between the stovetop and the tiles. For stoves requiring less clearance, use a protective heat shield or an alternative heat-resistant material.