Best current price£19.20from The Range
Shopping.co.uk recommended and popular offers
The Range£19.20Visit shop Thunderbolt All-Purpose Anchors Hexagon Flange Head Galvanised - M6 X 50 (Box Of 100) - White
Visit shop5 offers from £19.20 - £21.53
View price history by clicking the chart icon.
The Thunderbolt All-Purpose Anchors are designed for professional contractors and DIY enthusiasts who require a reliable fastening solution for masonry, concrete, and brick. These anchors offer the primary benefit of high-strength structural stability thanks to their hexagon flange head design, though users should note that they require precise drill sizing to ensure an optimal friction fit within the base material.
| Colour | White |
|---|---|
| Model Part Number | 1427523 |
| Brand | Thunderbolt |
These anchors are designed for solid base materials like concrete and standard brick. They are not recommended for hollow substrates.
While the galvanized construction offers excellent corrosion resistance, they are not intended for continuous saltwater immersion.
A standard socket wrench or impact driver is sufficient; tighten until the flange is firmly seated against the fixture.
These are M6 size anchors, requiring an M6 compatible drill bit.
These are designed as permanent fasteners. Removal usually requires grinding off the head or cutting the bolt shaft.
The drill hole is likely too large or the masonry is crumbling; relocate the hole or use a chemical anchoring grout to fill the void.
Ensure the hole is completely free of dust and debris; verify that the drill bit used is the correct diameter for an M6 anchor.
To install, first determine the correct drill bit size that matches the M6 specification. Drill a hole into the base material at a depth slightly deeper than the 50mm length of the anchor to account for dust collection. Clear all debris from the hole before inserting the anchor. Drive the anchor into place using a socket wrench or impact driver until the flange is seated firmly against the fixture. For maintenance, periodically inspect the anchor head for signs of oxidation if exposed to extreme environmental conditions, and check that the fixture remains tight against the mounting surface over time.
