Universal Water Dispenser Tap Spigot Cooler Bottle Lever Faucet Spout Kit - Blue + Red, 15mm Internal Thread

The tap features a 15mm internal thread, designed for a universal fit on compatible water dispenser bottles and coolers.

Yes, the kit includes both a blue lever (typically for cold) and a red lever (typically for hot), making it suitable for dispensers that handle both temperatures.

Installation is simple: unscrew the old tap, screw the new tap firmly into the bottle's threaded opening by hand, and attach the desired lever.

Check that the tap is securely tightened and that the bottle's opening has a good seal. A food-grade sealant or washer may be needed if the bottle's original seal is compromised.

It is designed as a universal replacement with a 15mm internal thread, fitting most standard dispensers. However, compatibility depends on the specific thread size of your dispenser bottle.

Clean with a damp cloth, or unscrew the tap and wash with warm, soapy water. Rinse thoroughly and ensure it's dry before reattaching.

The product description does not specify the exact materials, but it is designed for water dispensing and typically made from food-grade plastics.

Ensure the tap is screwed on tightly (but not over-tightened) to the bottle's thread. Check if there is a missing or damaged gasket/seal on the bottle's opening. If necessary, use a food-grade sealant or a suitable washer to create a better seal.

Remove the tap and clean the lever mechanism and the area where it moves. Check for any obstructions or debris. Apply a small amount of food-grade lubricant if the mechanism remains stiff.

Ensure the internal channel of the tap is not blocked by sediment or debris. Unscrew the tap and flush it with water. Also, check that the bottle is adequately filled and that there are no airlocks.

Verify that the bottle opening has a 15mm internal thread. This tap is specifically designed for that thread size. If your bottle has a different thread size or type, this tap will not be compatible.