Scotch Utility Masking Tape - 30mm X 50M - 3 Rolls/pack

The tape is designed to hold firmly for up to 2 days. Leaving it on longer may make removal more difficult or potentially leave residue.

No, Scotch Utility Masking Tape is intended for indoor use only. Outdoor conditions like moisture and temperature fluctuations can affect its performance and removal.

It is ideal for indoor applications on wood, metal, and plastic surfaces. It's recommended to test on an inconspicuous area first for other materials.

Ensure the surface is clean, dry, and dust-free. Apply the tape firmly and press down all edges. Allow paint to dry to the touch (30-60 minutes) before removing the tape slowly at a 45-degree angle.

Gently warm the residue with a hairdryer on a low setting and then peel the tape slowly at a 45-degree angle. You may need to use a mild adhesive remover for stubborn spots.

Yes, the tape is made with PEFC certified paper, which comes from responsibly managed forests.

The adhesive is made from natural rubber.

Ensure the surface is clean, dry, and free of dust, grease, or other contaminants. The surface may be too porous or textured for this tape's adhesion level. Test on a small, inconspicuous area first.

This can occur if the tape is left on for longer than 2 days, exposed to heat, or removed improperly. Try gently warming the residue with a hairdryer on a low setting and then peeling slowly at a 45-degree angle.

While hand-tearable, pulling too quickly or at an awkward angle can cause uneven tearing. Hold the tape firmly near the tear point and pull smoothly and decisively.

Ensure the tape was pressed down firmly and the surface was completely dry before painting. Remove the tape when the paint is dry to the touch, not fully cured, pulling slowly at a 45-degree angle.