Shopping.co.uk

FloPlast Waste Tee - 50mm Grey

FloPlast Waste Tee - 50mm Grey

Waste tees are used in two different ways. Their main use is to connect a section of waste pipe in...

Best current price£4.39from Professional Building Supplies

Best offers

Shopping.co.uk recommended and popular offers

All Offers

4 offers from £4.39 - £21.82

View price history by clicking the chart icon.

Professional Building SuppliesFloplast Grey Solvent Weld Waste Tee - 50Mm
Free delivery in 1–3 days
£4.39
Visit shop
eBay50mm (56mm) Grey Solvent Grey Waste Pipe Tee - ABS - FREE Next-Day Delivery
Free delivery in 1–3 days
£7.75
Visit shop
The RangeFloplast Abs Solvent Weld Swept Tee 50Mm Grey - Ws24g - Grey
Free delivery in 1–3 days
£21.14
Visit shop

Product Information

Full details

The FloPlast ABS Solvent Weld Swept Tee 50mm Grey is designed for plumbers and DIY enthusiasts needing to connect waste pipes efficiently. Its primary benefit is providing a smooth, directional flow for waste water, ensuring optimal system performance. A key consideration is that it requires solvent cement for permanent installation, meaning joints cannot be demounted. This guide covers its features, usage, and care.

All features

BrandFloPlast

Extended Product Information

FAQs

What is a swept tee used for?

A swept tee is primarily used to connect a smaller pipe into a larger, existing pipe run. Its curved ('swept') design ensures that the flow from the branch pipe enters the main pipe smoothly and in the correct direction, minimizing turbulence and preventing blockages.

Can this tee be used to create a 90-degree bend?

Yes, it can be used to create a 90-degree bend with access for cleaning. This is achieved by using the branch opposite the direction of flow and fitting an access plug into it.

What type of connection does this fitting use?

This is a solvent weld fitting. It requires the use of a solvent cement (like SC250) to create a permanent, bonded joint with solvent-weldable pipes.

What safety precautions should I take when using solvent cement?

Always work in a well-ventilated area, away from heat sources or flames. Avoid contact with skin and eyes. If contact occurs, wash thoroughly with soap and water.

How long does a solvent weld joint take to set?

The joint should be held for approximately 30 seconds after assembly. It needs to set for at least 5 minutes before being moved and the entire installation should be left for 12 hours before testing.

Can I disassemble the joint if I make a mistake?

No, solvent weld joints are permanent and cannot be demounted once the cement has set.

What material is the tee made from?

The tee is manufactured from high-quality ABS (Acrylonitrile Butadiene Styrene), which is known for its strength, impact resistance, and corrosion resistance.

Is this product compliant with standards?

Yes, this FloPlast waste tee is manufactured in the UK to BS EN 1455 and is Kitemarked, ensuring it meets relevant quality and safety standards.

Troubleshooting

Leak at the joint

Ensure the pipe was fully inserted and twisted during assembly. Check that sufficient solvent cement was applied to both surfaces. If the leak persists, the joint may need to be cut out and remade.

Difficulty inserting pipe into fitting

Ensure the pipe end is cut square and de-burred. Check that the pipe and fitting are clean and free from obstructions. Gently ease the pipe in, ensuring correct alignment.

Joint fails to set firmly

Verify that the correct type of solvent cement was used and that it was applied evenly. Ensure the joint was held in place for the recommended 30 seconds after assembly. Check environmental conditions (temperature may affect setting time).

Poor flow or blockage

Confirm the swept tee was installed in the correct orientation to allow flow into the main pipe. Ensure no debris was present in the pipe or fitting during installation. If the issue is with the overall system, check for blockages further down the line.

Pros and Cons

Pros

  • Ensures smooth, directional flow of waste water.
  • Durable ABS material provides long-lasting performance.
  • Solvent weld creates a robust, permanent seal.
  • Corrosion resistance maintains pipe integrity.
  • Manufactured to strict UK and European standards.

Cons

  • Requires permanent solvent weld for installation.
  • Cannot be easily disassembled once installed.
  • Solvent cement application requires good ventilation and safety precautions.
  • Limited to 50mm pipe sizes.
  • Not suitable for applications requiring frequent disassembly.

Setup, Compatibility & Care

Setup:

  1. Preparation: Ensure the outer wall of the pipe and the inner wall of the fitting are clean, dry, and free from dust, grease, or swarf.
  2. Apply Solvent Cement: Apply a uniform layer of SC250 solvent cement to both surfaces (pipe end and inside the fitting socket).
  3. Join: Immediately push the pipe fully into the fitting. Give the pipe a quarter-turn twist as you push to ensure full contact and even distribution of the cement.
  4. Set: Hold the joint firmly for approximately 30 seconds to prevent movement. Wipe away any excess solvent with a damp cloth.
  5. Curing: Allow the joint to set for at least 5 minutes before disturbing. The complete installation should be left undisturbed for 12 hours before testing under pressure.

Compatibility:

  • Pipe Size: Designed exclusively for use with 50mm diameter waste pipes.
  • Joint Type: Requires solvent cement (e.g., SC250) for a permanent solvent weld joint. Not compatible with push-fit or compression fittings.
  • Material: Suitable for use with ABS, PVC, and other solvent-weldable plastic piping systems.

Care:

  • Ventilation: Always use solvent cement in a well-ventilated area.
  • Safety: Keep solvent cement away from heat sources, sparks, and open flames. Avoid contact with skin and eyes; if contact occurs, wash immediately with soap and water.
  • Storage: Store solvent cement in a cool, dry place, tightly sealed.
  • Cleaning: Clean fittings and pipes with a clean cloth before applying solvent cement. The fitting itself requires no special cleaning once installed, other than standard plumbing system maintenance.

Price History

DatePrice
Visit shop