X' Picture Hooks - Large Double - Pack of 10 - Gold

The product description does not specify a maximum weight capacity. However, as they are large double hooks made of steel, they are designed for significant loads. For heavier items, always use multiple hooks and ensure they are securely installed in a suitable wall type.

These hooks are designed for use with the provided pins, which are best suited for plasterboard or drywall. For brick or concrete walls, you would need to use appropriate masonry drill bits and wall plugs (not included) to securely mount the hooks.

Each pack contains 10 large double picture hooks and 30 tempered blued steel pins, meaning you have 3 pins available per hook.

The hooks are made from quarter-hard steel with a brass-effect finish.

You will need a hammer to install the pins. A measuring tape and pencil may be helpful for accurate placement.

These hooks are designed for indoor use. The brass-effect finish may tarnish or corrode if exposed to moisture and outdoor elements.

Wipe gently with a soft, dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners which could damage the finish.

Ensure you are not attempting to hammer into a solid surface like brick or concrete. For plasterboard, try a slightly different angle or ensure the pin is aligned with the hook's hole. If the wall is unusually hard, consider pre-drilling a small pilot hole (smaller than the pin diameter).

Ensure the pins are fully hammered in and seated flush with the wall surface. If the wall material is very soft, consider using additional pins per hook or re-positioning the hook to a more solid part of the wall structure.

This is a decorative finish; minor variations can occur. Ensure the hook is clean and try wiping it with a soft cloth. For significant issues, contact customer support.