Best current price£99.00from Wex Photo Video
Shopping.co.uk recommended and popular offers
Wex Photo Video£99.00Visit shop LEE Filters SW150 System Adapter Ring for Nikon 19mm PC Lens
Visit shop1 offer from £99.00
View price history by clicking the chart icon.
The LEE Filters SW150 Mark II System Adaptor is a purpose-built solution for professional landscape and architectural photographers who use the Nikon 19mm PC-E tilt-shift lens. It enables the seamless integration of the SW150 filter system, allowing users to apply neutral density and graduated filters without sacrificing the lens's critical tilt-shift movements. While it provides unparalleled creative control for wide-angle perspective correction, users should note that the specialized installation requires careful alignment to maintain the system's structural integrity.
| Brand | LEE Filters |
|---|
No, this adapter is specifically machined for the Nikon 19mm PC-E lens only.
Yes, the system is designed to accommodate the SW150 polarizer alongside your rectangular filters.
The adapter is designed for the SW150 Mark II system; check your holder model for full compatibility.
The adapter is designed to clear the focus barrel, but always ensure the assembly does not physically obstruct the focus ring.
Ensure the filter holder is pushed firmly against the gasket and verify the adapter rings are seated tightly against the lens barrel.
Ensure the locking ring is tightened properly to the compressor ring assembly.
Verify that the filter holder is perfectly level and that no extra-thick filters or additional frames are being used.
To install the adapter, ensure your lens front element is clean and free of debris. Begin by sliding the compressor ring onto the lens barrel, followed by attaching the front ring and securing the assembly with the locking ring. Always double-check that the locking ring is tight enough to prevent rotation but not so tight that it damages the lens casing. When transporting, it is advisable to remove the filter holder portion of the system to reduce stress on the lens mount. Store in a dry, dust-free environment and wipe the components with a microfiber cloth after use to prevent sand or grit from affecting the mechanical threads.
