Apico Light Horn Kill Switch - KTM EXC 125-500 2017-2023

No, this specific Apico switch unit does not have an option to turn the headlight completely off. It only offers control between the main beam and the high beam.

No, this switch is designed for KTM EXC models from 2017 to 2023. It is not compatible with the 2016 model year.

While the unit includes a wiring harness, a specific diagram is not typically included. It is designed as a direct replacement, so it should integrate with your motorcycle's existing wiring. Referencing your KTM's service manual is recommended if you encounter any connection uncertainties.

You can clean the switch unit with a soft, damp cloth. Avoid using harsh chemicals, solvents, or high-pressure water, as these can damage the components.

Warranty information varies by retailer. Please check with the specific seller you purchased from for details on their warranty policy.

The switch includes a bar mount designed for standard handlebar diameters. While it should fit most aftermarket handlebars, it's always a good idea to measure your handlebar diameter to ensure compatibility if you have non-standard bars.

Verify the wiring harness is securely connected to the motorcycle's ignition system. Check for any kinks or breaks in the kill switch wire. Ensure the switch mechanism itself is not obstructed by debris.

Confirm that the headlight wiring is correctly connected. Check the bulb for damage. If the issue persists, inspect the switch contacts for corrosion or wear.

Ensure the horn wiring is properly connected. Test the horn separately if possible. Check for any obstructions around the horn button on the switch.

Tighten the bar mount clamp screws. Ensure the handlebar surface is clean and free of obstructions where the mount attaches.