In Line Fence Wire Tensioners x10 - Aluminium

The maximum wire size that these tensioners can accommodate is 5mm.

They are suitable for polywire, polyrope, and other fencing wires or cables up to 5mm in diameter. They are ideal for maintaining tension on long runs.

You cut the wire/rope, insert each end into the channels of the tensioner, secure it with the clip, and then rotate the tensioner to tighten.

The tensioners are made from aluminium to prevent corrosion, and they come with a rust-resistant galvanised clip.

This pack contains 10 in-line wire tensioners.

Basic wire cutting tools might be needed to cut the fence wire. Installation and adjustment are typically done by hand.

Care involves periodically checking tension and re-adjusting as needed. Cleaning with a damp cloth is sufficient; avoid harsh chemicals.

Ensure the galvanised clip is securely fastened to the wire/rope and that the wire/rope is properly seated within the tensioner's channel. Check if the wire/rope diameter exceeds the 5mm maximum.

Verify that the wire/rope is not excessively taut before attempting to adjust. Ensure there is no debris obstructing the turning mechanism. If new, it may require initial breaking-in.

Re-check the security of the galvanised clip and the wire/rope seating. Ensure the tensioner itself is not damaged. For prolonged tension, consider using two tensioners at different points if possible, or a different type of tensioning system for extreme requirements.