Best current price£4.99from eBay
Shopping.co.uk recommended and popular offers
eBay£4.99Visit shop Overlay Auto Spray Paint White Gloss 250ml
Visit shopeBay£5.99Visit shop Overlay Auto Spray Paint White Gloss 400ml
Visit shop3 offers from £4.99 - £5.99
View price history by clicking the chart icon.
The Overlay Auto Spray Paint in White Gloss is designed for automotive enthusiasts and DIY hobbyists looking to achieve a factory-like finish on small to medium-sized vehicle components. Its primary benefit is a high-quality, professional-looking coat that dries quickly and provides lasting durability, though users should note that the 250ml capacity is best suited for targeted touch-ups or specific parts rather than full-body vehicle resprays.
| Model Part Number | DIY5138 |
|---|---|
| Brand | Overlay |
Yes, it is suitable for both interior and exterior automotive plastic and metal components, provided the surface is properly prepped.
While the paint provides a durable gloss finish on its own, a compatible clear coat can be added for extra UV protection and depth.
Two to three light, even coats are generally sufficient to achieve full coverage and the desired gloss level.
This formula is designed for standard automotive body and trim parts; it is not intended for high-heat areas like engine blocks or exhaust systems.
While it is touch-dry quickly, allow at least 24 hours for the paint to fully cure and reach its maximum hardness.
Invert the can and spray for a few seconds to clear the valve, or wipe the nozzle tip with a lint-free cloth dampened with thinner.
Apply thinner coats from a further distance and avoid holding the spray in one spot for too long.
This is often caused by 'overspray' drying in the air; ensure you are working in a dust-free, well-ventilated area and not painting on a windy day.
Proper preparation is essential for a professional finish. Ensure the target surface is clean, dry, and free of grease or wax. Sand the surface lightly with fine-grit sandpaper if needed to improve adhesion. Always shake the can vigorously for at least one minute before use to ensure the pigment is properly mixed. When finished, invert the can and spray for a few seconds to clear the nozzle, preventing clogs for future use. Store the canister in a cool, dry place away from direct sunlight.
