PlastiKote Trade High Temperature Spray Paint - Black

The PlastiKote Trade High Temperature Spray Paint can withstand temperatures of up to 200°C.

It is ideal for metal surfaces exposed to very high temperatures, such as boilers, pipework, and exhaust components.

One can provides coverage of approximately 1 to 1.75 square meters.

No, this paint is specifically designed for metal surfaces that experience high heat and is not suitable for plastics or wood.

Drying times can vary based on temperature and humidity. It's generally touch-dry in a short period, but full curing for high-temperature resistance may take longer. Refer to the product can for specific drying times.

Yes, it offers resistance to petrol and other chemicals.

For best results and maximum adhesion on high-temperature surfaces, thorough preparation is recommended, which may include light abrasion. A dedicated high-temperature primer might be beneficial in extreme cases, but often direct application to a clean, prepared metal surface is sufficient.

Ensure the can is shaken thoroughly and frequently during use. Hold the can at the recommended distance. Check the nozzle for blockages and clean if necessary.

Verify the surface was properly cleaned, degreased, and dried before application. Ensure the surface is suitable for high-temperature paint and has been lightly abraded if recommended.

Ensure consistent application technique. Apply in conditions recommended on the can (temperature, humidity). Some high-temperature paints may have a matte finish by design.

After spraying, turn the can upside down and spray for a few seconds to clear the nozzle. If still blocked, remove the nozzle (carefully) and soak it in a solvent like white spirit, then rinse and dry before reattaching.