KAUDEN miniFloor 19" Data Cabinet - 12U - 600mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The KAUDEN miniFloor 12U 600mm Data Cabinet is an ideal solution for IT professionals and installers looking for a compact, floor-mounted housing for AV, CCTV, and small-scale networking equipment. Its primary benefit is its highly accessible design, featuring lift-off side and back panels that make equipment installation in tight corners or narrow hallways significantly easier. However, users should note that as a floor-standing unit with fixed dimensions, it requires pre-planning regarding floor space and weight distribution for rack-mounted hardware.
All features
| Model Part Number | KV12U/600XF |
|---|---|
| Brand | KAUDEN |
Extended Product Information
FAQs
Can this cabinet be wall-mounted?
No, this specific model is designed strictly as a floor-mounted unit.
Does it come with cooling fans?
This unit is supplied as a frame and door enclosure; active cooling accessories should be added based on your specific heat dissipation needs.
What is the total height of the unit?
This is a 12U rack unit; please refer to the technical data sheet for exact external dimension measurements.
Are the rack rails adjustable?
The internal mounting profiles are designed for standard 19-inch equipment and are fixed to the frame for stability.
Can I replace the brush plate with a solid blanking plate?
Yes, both the blanking plates and brush plates are modular and can be swapped between the top and bottom positions.
Troubleshooting
Side panels do not sit flush
Ensure the cabinet is level. If the base is uneven, the frame may torque slightly, preventing the lift-off doors from seating perfectly.
Difficulty passing thick cable bundles
Remove the brush plate assembly from the cable entry point to feed the plugs through, then reinstall the brush module around the cables.
Pros and Cons
Pros
- Tool-free panel removal via lift-off design
- Flexible cable entry options for top or bottom access
- Brush plates help maintain a dust-resistant seal while allowing cable throughput
- Compact 12U footprint ideal for small server rooms or AV closets
Cons
- Not suitable for wall mounting
- Requires assembly or dedicated floor space
- Limited depth for ultra-deep enterprise servers
Setup, Compatibility & Care
Installation of the KAUDEN miniFloor requires a level floor surface to ensure stability and proper alignment of the rack rails. When setting up, identify your primary cable path before finalizing the position to take advantage of the top and bottom entry plates. To maintain the cabinet, keep the exterior clear of obstructions to ensure the lift-off doors can be removed during future equipment upgrades. Periodically check the screw fixings for the rack mount profiles to ensure they remain tightened, and clean the cabinet with a dry, lint-free cloth. Do not use abrasive cleaners on the finish, as this may damage the powder-coated exterior.