Loops Straight Square Lever On Euro Lock Backplate - Silver

This handle is designed to be used with a standard Euro profile cylinder lock. You will need a compatible lock mechanism installed in your door.

Typically, door furniture sets like this will include necessary fixing screws. Please check the product packaging for confirmation.

While the polished chrome finish is durable, this particular model is generally recommended for interior use. For exterior doors, consider hardware specifically rated for outdoor conditions.

The backset is measured from the edge of the door to the center of the keyhole. This handle's backplate is designed for standard Euro lock mechanisms which have a defined backset, usually 57mm or 72mm, but the handle itself fits over the lock case.

Warranty information can vary. Please refer to the manufacturer's documentation or the retailer's sales page for specific warranty details.

This product is sold as a pair, providing handles for both sides of a single door.

Check that the spindle is correctly aligned with the lock mechanism and not binding. Ensure screws are not overtightened, which can restrict movement. Verify the lock mechanism itself is functioning correctly.

Tighten the fixing screws on the backplate. If the door is thicker or thinner than standard, ensure appropriate packing or longer screws are used if necessary.

Ensure there are no obstructions on the door surface where the backplate sits. Check if the door is uneven or if the lock mechanism recess is too deep.