Flymo Lawnmower Blade - FLY071
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners of Flymo Speedi-Mo 360C and Speedi-Mo 360VC lawnmowers. The key benefit is restoring optimal cutting performance and safety by replacing a worn blade. A caveat is the need for regular checks to prevent damage. This genuine Flymo replacement blade (FLY071) ensures your lawnmower cuts effectively, maintains grass health, and prevents potential damage to the mower or injury from blade breakage.
All features
| Model Part Number | FLY071 |
|---|---|
| Brand | Flymo |
Extended Product Information
FAQs
How often should I check my lawnmower blade?
It is recommended to inspect the blade before each mowing session for any obvious damage, and at least once a month for signs of wear, dullness, or imbalance, especially during peak mowing season.
What are the signs that my blade needs replacing?
Signs include visible thinning or erosion, nicks or chips on the cutting edge, bends, cracking, or if the blade is causing uneven cuts and damaging the grass.
Can I use a blade from a different brand?
It is strongly recommended to use only genuine Flymo parts like the FLY071 for your specific Flymo models (Speedi-Mo 360C/VC). Non-genuine or incompatible blades may not fit correctly, can perform poorly, and may cause damage to your lawnmower or pose a safety hazard.
What happens if the blade breaks while mowing?
Blade breakage can occur if the blade is severely weakened or damaged. This can send metal fragments flying at high speed, posing a serious risk of injury to the operator and bystanders, and can also damage the lawnmower itself.
How do I know if my blade is unbalanced?
An unbalanced blade will cause the lawnmower to vibrate excessively during operation. You may also notice an uneven cut. Regular visual inspection and ensuring the blade is securely and centrally mounted can help maintain balance.
Is this blade suitable for all Flymo lawnmowers?
No, the FLY071 blade is specifically designed for the Flymo Speedi-Mo 360C and Speedi-Mo 360VC models only. Always check your lawnmower's manual or product specifications for the correct replacement blade part number.
Troubleshooting
Blade not cutting evenly
The blade may be worn, dull, or unbalanced. Inspect for damage and replace if necessary. Ensure the blade is correctly installed and tightened.
Lawnmower vibrates excessively during use
This often indicates an unbalanced or damaged blade. Check the blade for bends or thinning and ensure it is securely fastened. Replace the blade if it is damaged or shows signs of imbalance.
Difficulty cutting through thick grass
A dull blade is the most common cause. Replace the blade with a sharp, genuine Flymo FLY071 part for optimal performance.
Loud noise or unusual sounds during mowing
This could be due to a loose blade, a damaged blade hitting the deck, or foreign objects. Stop the mower immediately, disconnect power, and inspect the blade and cutting deck for obstructions or damage. Ensure the blade is securely tightened.
Pros and Cons
Pros
- Ensures optimal cutting performance for a tidy lawn.
- Prevents dangerous blade breakage during operation.
- Genuine part for guaranteed compatibility and fit.
- Helps maintain the health and appearance of your grass.
- Protects your lawnmower from damage caused by worn blades.
Cons
- Requires regular inspection to determine replacement need.
- Not compatible with models other than Speedi-Mo 360C/VC.
- Installation requires basic mechanical knowledge.
Setup, Compatibility & Care Instructions
Compatibility: This FLY071 blade is specifically designed for the Flymo Speedi-Mo 360C and Flymo Speedi-Mo 360VC lawnmower models. It measures 36cm in length.
Setup:
- Safety First: Ensure the lawnmower is switched off, unplugged from the power source, and the spark plug cap (if applicable) is removed before beginning.
- Access the Blade: Tilt the lawnmower or place it on its side (ensure the air filter/carburettor side is upwards to prevent oil leakage).
- Remove Old Blade: Locate the blade fixing bolt and nut. Use the appropriate tools (e.g., wrench, socket set) to loosen and remove the bolt and nut. Carefully detach the old blade.
- Attach New Blade: Position the new FLY071 blade onto the mower spindle, ensuring it is oriented correctly (often marked with an 'up' indicator or specific mounting points).
- Secure New Blade: Re-insert the blade fixing bolt and nut. Tighten them securely according to the manufacturer's specifications (refer to your lawnmower's manual for torque settings if available).
- Final Check: Ensure the blade is firmly attached and spins freely without wobble.
Care:
- Regularly inspect the blade for signs of wear, damage, bends, or excessive dullness.
- Clean the blade after use to remove grass clippings and debris, which can accelerate corrosion.
- Check the blade's balance periodically. An unbalanced blade can cause excessive vibration and damage the lawnmower's motor or bearings.
- Store the lawnmower in a dry place to prevent premature rusting of the blade.