Best current price£8.99from Appliances Direct (BID)
Shopping.co.uk recommended and popular offers
Appliances Direct (BID)£8.99Visit shop Elego Gray Modern Manual Angled Radiator Valves (Pair) MAN-AG-3AG
Visit shop3 offers from £8.99
View price history by clicking the chart icon.
This pair of modern angled radiator valves from Elego in Grey is designed for users looking to add a sleek, finishing touch to their contemporary or designer radiators and heated towel rails. The key benefit is their universal compatibility with 1/2 thread fittings and all radiator types in the Elego range, ensuring a straightforward installation. A minor caveat is that these are manual valves, offering basic flow control rather than thermostatic regulation. They are constructed from durable brass with an ABS finish, featuring an adjustable water flow and a bi-directional design for flexible fitting.
| Colour | Grey |
|---|---|
| Model Part Number | MAN-AG-3AG |
| Brand | Elego |
Yes, these valves are compatible with all Elego radiators, including column, panel, vertical flat tube, and aluminium radiators, due to their standard 1/2 thread connection.
Yes, these are manual valves and can be used with any standard heating system, including those with combi boilers, provided the pipework and radiator connections are compatible.
Bi-directional means the valve can be fitted on either the flow (hot water in) or return (water out) pipe of your radiator, offering flexibility during installation.
Standard plumbing tools such as adjustable wrenches and pipe cutters may be required for installation. Ensure you have PTFE tape or pipe sealant for threaded connections.
The valve has a manual spindle that can be turned to open or close the water flow to the radiator. Turn clockwise to close and counter-clockwise to open.
Angled valves are designed for pipework that comes out of the wall at an angle to the radiator connection, while straight valves are for when the pipework comes directly out of the floor or wall towards the radiator.
Ensure the 1/2 BSPT thread is properly sealed with PTFE tape or pipe sealant and that the valve is screwed in securely.
Check that the 15mm compression fittings are tightened correctly and that the pipework is clean and free of obstructions.
Verify the valve is fully open or adjusted to the desired position. Ensure there are no blockages in the radiator or pipework and that the system is properly bled.
Check for debris in the valve mechanism. If the issue persists, it may indicate an internal fault, and the valve may need replacement.
Compatibility:
These valves feature a 1/2 BSPT radiator coupler and 15mm compression inlets. They are designed to be compatible with all Elego radiators and heated towel rails. Ensure your existing radiator or pipework has a corresponding 1/2 BSPT connection for the valve and 15mm pipework for the compression fittings.
Setup:
Care:
Clean the valves with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the matte finish. Periodically check connections for any signs of leakage.
