Makita Cordless Brushless Pruning Saw - DUC50Z

No, this is a 'body only' version. You will need to purchase a compatible Makita 18V LXT battery and charger separately before you can use the pruning saw.

The DUC50Z features tool-less chain adjustment. Locate the knob on the side of the saw, turn it to tighten or loosen the chain until it is properly tensioned.

Use a dedicated bar and chain oil. Do not use motor oil or other lubricants, as they may not provide adequate lubrication or could damage the system.

The saw is designed for pruning tasks and generally handles branches up to approximately 4-5 inches in diameter, depending on the wood's density.

Battery life depends on the amp-hour (Ah) rating of the battery used and the intensity of the cutting task. Higher Ah batteries will provide longer run times.

Yes, it features an electric brake that stops the chain quickly when the trigger is released, enhancing user safety.

Check that the battery is fully charged and correctly installed. Ensure the lock-off lever is not engaged and the trigger is depressed fully. Verify the chain is not bound or excessively tight.

Adjust the chain tension using the tool-less adjuster to ensure it is snug but still able to move freely by hand. Check the guide bar for any damage or wear.

Ensure the chain is sharp. Check the chain tension – too loose or too tight can affect performance. Verify the chain oil reservoir is filled and the lubrication system is functioning.

The battery may be depleted; try a fully charged battery. The saw may have overheated; allow it to cool down. Check for any obstructions in the cutting path or around the chain.