D-C-Fix Woodgrain Midnight Navy Self Adhesive Vinyl Wrap Film - Pack of 3
Dc fix sticky back plastic designs are so authentic, you will hardly believe its a vinyl film. Rej...Dc fix sticky back plastic designs are so authentic, you will hardly believe its a vinyl film. Rejuvenate a worktop or wrap kitchen doors in minutes, customise furniture like drawer fronts or wardrobe doors. This vinyl can save you thousands on buying new, simply cover what you have. Dc fix is a non-permanent DIY solution, perfect for tenants or landlords looking for a quick fix, the vinyl can be removed fairly easy, use a hairdryer to warm the vinyl first and peel back, any leftover residue can be removed using warm soapy water. Dc fix has a water based low tack adhesive, this allows the vinyl to be repositioned during application, unlike stronger solvent based adhesives. Simply pull the vinyl back and start again. This vinyl has a 5 star rating for adhesion, lightfastness, shrinkage and durability. We will supply a pack of 3 rolls, each roll is 67.5cm x 2m This is a budget friendly solution for covering surfaces in your home. The self-adhesive vinyl wrap can be used to cover worktops, it’s heat resistant to 75C and durable to clean. This is a non-permanent DIY solution and is completely removable, ideal for tenants or landlords looking for a quick fix. Wrap doors and drawers in your kitchen or bedroom, turn shabby to chic with these amazing realistic designs! Application :- 1) Use a dc fix application kit to apply, it won’t damage the vinyl when smoothing out and includes a handy cutting tool 2) Overlap the vinyl wrap film a few mm to allow for shrinkage when joining on a worktop for example 3) The vinyl can be applied around sinks, cut out the sink area and trim any excess 4) The vinyl has a handy grid on the backing paper, to use as a cutting guide 5) The vinyl can be difficult to manoeuvre on surfaces like glass and appliances, lightly spray water first 6) Shaker style doors can be covered, cut each section separately and overlap the vinyl joins by a few mm 7) Use a hairdryer on curved surfaces, it warms the vinyl wrap film making it more pliable for tricky edges Aftercare :- 1) To ensure your surface is water tight, use silicone sealant around sinks and hobs for example 2) Wipe clean using regular household cleaner, do not scrub the vinyl and wipe spillages that may stain immediately e.g. curry 3) Do not cut or move sharp objects around on the vinyl, it will damage it – always use worktop savers to protect the vinyl 4) Heat resistant to 75C, so hot plates and cups are fine, but not hot pans, keep 12 inches away from naked flames dc fix Brand :- Made in Germany and it shows, with a 5 star rating for adhesion, opacity, lightfastness, shrinkage and durability. Unlike solvent based adhesives, dcfix has a water based low tack adhesive that allows you to reposition the vinyl during application, it then bonds fully within 24 hours, remove using heat from a hairdryer.
This guide is for anyone looking to refresh their home decor affordably and easily using D-C-Fix self-adhesive vinyl wrap. The primary benefit is the ability to transform surfaces like worktops and furniture quickly and inexpensively. Keep in mind that while it's removable, it's not designed for extremely high-traffic areas where it may be prone to damage. This guide will walk you through the key features, best practices, and troubleshooting tips for successful application and maintenance.
All features
Brand
d-c-fix
Extended Product Information
FAQs
Can D-C-Fix be used on textured surfaces?
It is best applied to smooth surfaces for optimal adhesion. Textured surfaces may not provide a good bond.
How do I remove D-C-Fix vinyl?
Use a hairdryer to warm the vinyl and gently peel it back. Any remaining adhesive residue can be removed with warm, soapy water.
Is D-C-Fix heat resistant?
Yes, it is heat resistant up to 75°C. Avoid placing hot pans directly on the surface and use a trivet.
Can I use D-C-Fix in a bathroom?
Yes, but ensure good ventilation and apply silicone sealant around areas exposed to water to prevent moisture damage.
What tools do I need to apply D-C-Fix?
You'll need a measuring tape, scissors or a utility knife, a smoothing tool (or squeegee), and optionally a hairdryer.
What is the warranty on D-C-Fix?
D-C-Fix comes with a 5 star rating for adhesion, opacity, lightfastness, shrinkage and durability.
Troubleshooting
Bubbles or air pockets under the vinyl.
Lift the vinyl back up, smooth out the bubbles with the application tool, and reapply.
Adhesive not sticking properly.
Ensure the surface is clean and dry. Use a hairdryer to activate the adhesive and press firmly.
Seams visible on worktops or large surfaces.
Overlap the vinyl slightly (a few millimeters) to compensate for shrinkage, and use a seam roller or application tool to smooth the seams.
Vinyl peeling or lifting at edges.
Use a hairdryer to warm the edges and press them down firmly. You can also use a small amount of adhesive if needed.
Pros and Cons
Pros
Cost-effective way to update and refresh living spaces.
Easy to apply with repositionable adhesive.
Wide range of designs and finishes available.
Ideal for renters as it is easily removable.
Cons
Not suitable for extremely high-wear areas.
Requires careful application to avoid bubbles and creases.
May require extra sealant around sinks and hobs for waterproofing.
Not suitable for use near open flames or very high heat sources such as hot pans
Setup, Compatibility & Care
Preparation:
Clean the surface thoroughly to remove any dirt, grease, or debris.
Ensure the surface is smooth and even. Fill any imperfections with filler and sand down.
Application:
Use a D-C-Fix application kit for best results. This kit won’t damage the vinyl and includes a cutting tool.
Overlap the vinyl wrap film a few mm to allow for shrinkage when joining.
Use the grid on the backing paper as a cutting guide.
For tricky edges, use a hairdryer to make the vinyl more pliable.
Compatibility:
Suitable for use on most smooth, non-porous surfaces like wood, laminate, and metal.
Avoid applying on surfaces with extreme heat exposure.
Care:
To ensure your surface is waterproof, use silicone sealant around sinks and hobs.
Wipe clean with a regular household cleaner. Do not scrub.
Protect the vinyl from sharp objects and always use worktop savers.