Best current price£7.99from My Motor World
Shopping.co.uk recommended and popular offers
My Motor World£7.99Visit shop Aerosol Solutions Kwik Tak Heavy Duty Contact Spray Adhesive 500Ml
Visit shop5 offers from £7.99 - £19.50
View price history by clicking the chart icon.
The Kwik Tak Heavy Duty Contact Spray Adhesive is designed for professionals and DIYers needing a robust bonding solution for upholstery, foam-backed carpets, and decorative applications. Its key benefit is a strong, versatile adhesion with a variable spray pattern for controlled application. A primary caveat is its limitation on certain plastics like PVC and expanded polystyrene, and a maximum operating temperature of 50°C.
| Model Part Number | ASO0600 |
|---|---|
| Brand | Aerosol Solutions |
It is ideal for bonding materials like foam-backed carpets, upholstery fabrics, wood, and some types of plastic. Always test on a small, inconspicuous area first.
You should avoid using it on plasticised PVC, PVC coated materials, and expanded polystyrene (styrofoam).
The adhesive has a maximum operating temperature of 50°C (122°F).
For optimal results, ensure both surfaces are clean and dry. Apply the adhesive to both surfaces, allow it to become tacky (usually 5-15 minutes depending on conditions), then firmly press the surfaces together.
Store the can upright in a cool, dry place, away from heat, sparks, and open flames. Do not store in temperatures exceeding 50°C.
While the adhesive is wet, it can typically be cleaned with a solvent appropriate for contact adhesives. Once cured, it may be difficult to remove and often requires mechanical abrasion.
Ensure the can is shaken thoroughly before and during use. Check the nozzle for any blockages. Clean the nozzle by inverting the can and spraying until clear.
Verify that surfaces are clean, dry, and free from dust or grease. Ensure the adhesive has been allowed to tack off sufficiently before joining surfaces. Check if the material being bonded is compatible (not PVC or expanded polystyrene).
Shake the can vigorously. Ensure the nozzle is properly attached and not clogged. Try cleaning the nozzle as described in the care instructions.
Setup: Ensure the application area is well-ventilated. Shake the can vigorously before use. Test spray pattern on a scrap surface. Adjust nozzle for desired spray width.
Compatibility: Suitable for bonding porous materials such as foam, fabric, wood, and certain plastics. *Not* suitable for plasticised PVC, PVC coated materials, or expanded polystyrene.
Care: Store in a cool, dry place, away from direct sunlight and heat sources. Keep the nozzle clean after each use by inverting the can and spraying for a few seconds until clear propellant emerges. Dispose of the can responsibly according to local regulations.
