Best current price£160.96from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£160.96Visit shop Festo 5/2 Monostable Hand Lever Valve G1/8 750L/Min -0.95 - 10Bar/-14 - 145Psi - 4165855
Visit shop6 offers from £160.96 - £169.22
View price history by clicking the chart icon.
This Festo VHEF hand lever valve is designed for industrial automation professionals who need precise, manual pneumatic control. Its key benefit is robust and reliable operation in a compact metal housing, allowing for efficient system management. A potential caveat is its specific G1/8 connection, requiring compatible fittings. This 5/3 closed valve features piston slide and disc seat technology for durability, a nominal flow rate of 700 l/min, and operates within a wide pressure range.
| Model Part Number | VHEF-HS-P53C-M-G18 |
|---|---|
| Brand | Festo |
It means the valve has five ports and three positions. In the 'closed' center position, all five ports are blocked, effectively stopping flow and holding actuators in place.
The maximum operating pressure for this valve is 10 bar.
It uses a G1/8 pneumatic connection, which is a standard BSPP thread size.
While it is manually actuated, it can be integrated into automated systems if the manual control is part of a sequence or for emergency override.
The valve housing is made of an aluminum alloy.
The nominal flow rate is 700 liters per minute (l/min).
The valve operates between -10°C and +60°C.
Check for obstructions around the lever mechanism. Ensure pneumatic pressure is within the operating range. Verify that connected airlines are not kinked or blocked.
Inspect all G1/8 connections for proper sealing. Ensure the valve is rated for the applied pressure. If leakage persists, the internal seals may be compromised, and the valve may need replacement.
Verify correct port connections between the valve and the actuator. Check the flow rate and pressure of the air supply. Ensure the valve's 5/3 configuration matches the actuator's requirements.
Setup: Ensure all pneumatic lines are clean before connecting. Connect compressed air supply to the appropriate port and pneumatic actuators to the output ports as per the circuit diagram. The G1/8 connection requires a compatible threaded fitting.
Compatibility: This valve is compatible with standard pneumatic systems operating within the specified pressure range (-0.95 to 10 bar). Ensure your air supply meets general pneumatic standards. The G1/8 thread is a BSPP standard.
Care: Regularly inspect the valve for any signs of external damage. Keep the area around the valve clean. No specific lubrication is required due to the valve's internal design. Avoid exposing the valve to corrosive substances or temperatures outside its specified operating range (+60°C maximum, -10°C minimum).
