Restore your wood to its former glory with Barrettine Wood Reviver. It works quickly on UV-damaged...Restore your wood to its former glory with Barrettine Wood Reviver. It works quickly on UV-damaged grey wood to bring back its original warm tones. This wood restorer can also help remove rust stains from fixings, as well as stains from tannin runs, watermarks, iron, and light dirt. It's a ready-to-use formula that is easy to apply, saving time and effort by eliminating the need for dilutions or messy sanding. It restores wood to its original tone, reverses the effects of UV damage and grey wood, and is excellent at removing other wood stains. It offers a cost-effective way to revive timber with a coverage of up to 4m² per litre. The low VOC and chlorine bleach-free formulation makes it environmentally friendly.
This guide is for anyone looking to restore the natural beauty of their wooden surfaces. Barrettine Wood Reviver effectively rejuvenates weathered wood, reversing UV damage and removing stains. Keep in mind that while it's easy to apply, heavily damaged wood may require multiple applications for optimal results. It's a ready-to-use formula that saves time and effort.
All features
Model Part Number
WORE001
Brand
Barrettine
Extended Product Information
FAQs
How much area does one litre of Barrettine Wood Reviver cover?
One litre of Barrettine Wood Reviver typically covers up to 4m².
Do I need to sand the wood before applying the product?
No, the product is designed to be ready to use without sanding, saving time and effort.
Is Barrettine Wood Reviver safe for use around plants?
While the formulation is low VOC, it's recommended to protect nearby plants from direct contact during application and rinsing.
Can I use this product on painted wood?
No, this product is designed for use on bare wood only. It may damage painted surfaces.
How long should I leave the product on the wood before rinsing?
The recommended dwell time is specified on the product label. Always follow the manufacturer's instructions.
What should I do if I get the product on my skin?
Rinse the affected area with plenty of water. If irritation persists, seek medical advice.
Can I apply a finish or sealant after using the wood reviver?
Yes, once the wood is completely dry, you can apply a suitable finish or sealant to protect the wood and enhance its appearance.
Troubleshooting
Uneven results or streaking after application.
Ensure even application, avoid overlapping strokes, and rinse thoroughly after the recommended dwell time.
Stains not fully removed.
Reapply the product, allowing a longer dwell time, and scrub gently before rinsing.
Product not working on heavily soiled surfaces.
Pre-clean the surface with a suitable wood cleaner before applying the reviver.
Pros and Cons
Pros
Easy to apply, saving time and effort.
Restores wood to its original tone.
Reverses the effects of UV damage and grey wood.
Effectively removes various stains.
Environmentally friendly formulation.
Cons
May require multiple applications on severely damaged wood.
Results may vary depending on the type and condition of the wood.
Setup, Compatibility & Care
Preparation: Clean the wooden surface of loose debris and dirt. Ensure the surface is dry before application.
Application: Apply the Wood Reviver evenly using a brush or sponge.
Dwell Time: Allow the product to sit on the wood for the recommended time (check product label). Do not let the product dry on the surface.
Rinsing: Rinse the surface thoroughly with clean water.
Drying: Allow the wood to dry completely before applying any further treatments or finishes.
Compatibility:
Suitable for most types of wood.
Test on a small, inconspicuous area first to ensure compatibility and desired results.
Care:
Store in a cool, dry place, away from direct sunlight.