Shimano Deore XT BR-M8220/BL-M8200 Brake Set - 4 pot

Name: Shimano Deore XT BR-M8220/BL-M8200 Brake Set - 4 pot
Brand: SHIMANO
SKU: sbfezra3dh
Availability: InStock

Shimano Deore XT BR-M8220/BL-M8200 4 pot bled brake levers and callipers F + R. XT 4 pot Enduro/Tr...

Best current price£309.99from Team Cycles

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

Team Cycles£309.99Visit shop

Shimano Unisex Black Xt Br-M8220/Bl-M8200 4 Pot Bled Front And Rear Hydraulic Brake Set

Visit shop

All Offers

3 offers from £309.99 - £369.99

View price history by clicking the chart icon.

Team CyclesShimano Unisex Black Xt Br-M8220/Bl-M8200 4 Pot Bled Front And Rear Hydraulic Brake Set

Free delivery in 1–3 days

£309.99

Visit shop

Tweeks CyclesShimano BR-M8220/BL-M8200 XT 4 Pot Front & Rear Brake Set

Free delivery in 1–3 days

£340.00

Visit shop

eBayShimano Brake Set XT M8220 4pot KIT PM F and R Black

£4.50 delivery

£369.99

Visit shop

Product Information

Full details

The Shimano Deore XT BR-M8220/BL-M8200 4-piston brake set is designed for aggressive Enduro and Trail riders seeking maximum stopping power and consistent modulation. Its key benefit is reliable, powerful braking in all conditions, allowing for greater control on technical descents. A caveat is that rotors and brake mounts are sold separately, requiring additional purchases for a complete system.

All features

Model Part Number	IBRM8220KIT
Brand	SHIMANO

Extended Product Information

FAQs

Are rotors and brake mounts included with this kit?

No, rotors and brake mounts are sold separately. You will need to purchase these to complete the installation.

What type of brake fluid should I use?

This brake set is designed to use Shimano's specific hydraulic mineral oil. Do not use DOT fluid, as it can damage the system.

Can I use these brakes for downhill or cross-country riding?

These brakes are optimized for aggressive Enduro and Trail riding due to their high power and modulation. They can be used for downhill but may be overkill for lighter cross-country applications.

How do I adjust the lever reach?

The BL-M8200 lever features a reach adjust screw. Use a small Allen key to turn the screw to move the lever closer to or further from the handlebar.

What is SERVO WAVE technology?

SERVO WAVE is Shimano's technology that provides a short initial stroke for quick pad engagement, followed by a rapid increase in lever ratio as you pull, delivering more power efficiently with better modulation.

How often should I bleed the brakes?

Brake bleeding is recommended annually or whenever you notice a spongy lever feel, indicating air has entered the system. Frequent heavy use, especially in hot conditions, may require more frequent checks.

Can I mix and match these levers with other Shimano calipers?

While generally compatible within Shimano's hydraulic road/mountain groupsets using mineral oil, it is best practice to use the levers and calipers as designed for optimal performance and warranty coverage.

Troubleshooting

Brake lever feels spongy

The brake system likely has air in the lines. Bleed the brakes following Shimano's instructions using proper hydraulic mineral oil.

Brakes are noisy (squealing or grinding)

Ensure rotors are clean and free of contamination. Check brake pad alignment and bed them in properly. If noise persists, try cleaning the rotor and pads or consider replacing the pads.

Reduced braking power

Check brake pad wear and replace if necessary. Inspect rotor condition and ensure it is not warped or excessively worn. Verify there are no air bubbles in the system and that the fluid is not contaminated.

Lever doesn't return fully

Check for any obstructions or kinks in the brake hose. Ensure the cable routing is not binding. Clean the lever pivot and ensure it moves freely.

Brake caliper alignment issues

Loosen the caliper mounting bolts slightly, squeeze the brake lever firmly, and then re-tighten the bolts while holding the lever. This helps center the caliper over the rotor.

Pros and Cons

Pros

Exceptional stopping power for aggressive riding
Consistent and reliable performance in varied weather conditions
Excellent modulation and control on descents
Ergonomic lever design reduces hand fatigue
Quiet operation due to noise-reduction features
Customizable braking feel with heat-tuning system

Cons

Rotors and brake mounts are not included and must be purchased separately
Higher price point compared to entry-level brakes
Requires specific Shimano hydraulic brake fluid for maintenance
Initial setup may require professional knowledge for optimal performance

Setup, Compatibility & Care

Setup: This kit includes pre-bled levers, calipers with hoses (1000mm and 1700mm), pads, fittings, and brake fluid. Important: Rotors and brake mounts are *not* included and must be purchased separately to complete the installation. Ensure your frame and fork have the correct mounts (e.g., Post Mount with adapters if needed). Hoses can be cut to desired lengths and re-bled if necessary. Consult your bicycle manufacturer's specifications for compatible rotor sizes (160mm, 180mm, 203mm recommended) and brake mount types.

Compatibility: Compatible with Shimano Ice Tech Center Lock rotors for optimal performance. Can be used with resin or metal brake pads, with or without fins, depending on desired heat management and braking power. Requires Shimano hydraulic mineral oil for bleeding.

Care: Regularly inspect brake pads for wear and replace as needed. Clean calipers and rotors with a dedicated disc brake cleaner. Periodically check brake fluid levels and bleed the system if lever feel becomes spongy, indicating air in the lines. Avoid getting oil or grease on the rotor surface. For long-term storage, ensure the bike is stored in a clean, dry environment.