Best current price£15.31from PVC Cladding UK
Shopping.co.uk recommended and popular offers
PVC Cladding UK£15.31Visit shop Molan Brown Exitex Pvc F Section Rafter Supported - 25Mm X 4Mtr
Visit shop2 offers from £15.31 - £19.27
View price history by clicking the chart icon.
The PolyX PVC F Section is an essential trim component for professional roofing installers and DIY enthusiasts working with 25mm polycarbonate sheeting. This F-shaped profile provides a clean, finished aesthetic to the exposed edges of your roofing installation while ensuring a secure, weather-resistant border. While it is specifically engineered for rafter-supported systems, users should note that it is strictly sized for 25mm thick sheets and will not be compatible with thinner glazing options.
| Colour | Brown |
|---|---|
| Series | PolyX |
| Model Part Number | PVCF254-B |
| Brand | Storm |
No, this specific profile is engineered exclusively for 25mm polycarbonate sheets.
The PolyX F Section is specifically designed for rafter-supported systems.
A fine-toothed hand saw or a miter saw with a plastic-cutting blade is recommended for a clean finish.
The F-section generally relies on a friction fit over the sheet edge; please refer to your specific rafter system instructions for additional fastening requirements.
The PVC is pre-finished in brown; it is not recommended to paint the material as it may lead to peeling or finish degradation.
Ensure the polycarbonate sheet is fully pushed into the profile and there is no debris obstructing the channel.
Check the edge of the polycarbonate for crushed flutes or burs from cutting; trim these away and ensure the sheet is not angled.
To install, ensure the edges of your 25mm polycarbonate sheet are cut cleanly and are free of loose debris. The F-section should be measured to the length of the sheet and cut to size using a fine-toothed saw. Apply the trim by pushing it firmly over the edge of the sheet until it is fully seated. For long-term care, clean the PVC trim periodically with a mild detergent and water to prevent the buildup of grime. Avoid using abrasive sponges or solvents that could scratch or weaken the finish of the brown PVC material.
