Best current price£148.24from eBay
Shopping.co.uk recommended and popular offers
eBay£148.24Visit shop 145R10 Trailer Wheel, Tyre 10"" 500kgs 84/82N 4 stud 4 Inch PCD E-Mark (Set of 2)
Visit shop
B&Q£148.95Visit shop B&Q - 145R10 Trailer WheelTyre 10" 500Kgs 84/82N 4 Stud 4 Inch Pcd E-Mark (Set Of 2)
Visit shop4 offers from £148.24 - £148.95
View price history by clicking the chart icon.
This guide is for trailer owners and operators seeking reliable, road-legal wheels for various trailers. The key benefit is enhanced safety and performance with E-Marked, high-speed radial tires on durable steel rims. A potential consideration is that hub and stub axles are sold separately. This product is a set of two 145R10 trailer wheels featuring Wanda WR068 tires on grey powder-coated steel rims with a 4-inch PCD. They are designed for high-speed use and are E-Marked for European road legality.
| Model Part Number | EC1028 |
|---|---|
| Brand | Parnells |
Yes, these wheels are E-Marked, making them legal for use on roads in the UK and across Europe.
The tires have a speed rating of 'N', which corresponds to a maximum speed of 140 km/h (86 mph).
This refers to the Pitch Circle Diameter, an imperial measurement of 4 inches, indicating the spacing of the wheel studs on the hub.
These wheels are suitable for trailers that require a 145R10 tire size and have a hub with a 4-inch PCD. Always check the trailer's load capacity against the wheel's rating.
The product is a set of wheels and tires. Mounting hardware (bolts or nuts) is not included and should be sourced separately based on your trailer's hub requirements.
The load rating is 84/82, which translates to 500kgs for a single axle application and 475kg for a dual axle application.
Clean the rims with mild soap and water. Avoid harsh chemicals or abrasive materials that could scratch or damage the coating. Dry thoroughly after washing.
Ensure the wheel is properly tightened to the hub. Check tire inflation pressure. If vibration persists, the wheel may require balancing.
Check wheel alignment and ensure the trailer is not overloaded. Verify tire pressures are correct and consistent.
Confirm that the hub PCD is indeed 4 inches (imperial) and the center bore size is compatible (67mm). Ensure there are no obstructions on the hub or wheel mounting surface.
Setup: These wheels come pre-fitted with tires. Ensure they are inflated to the manufacturer's recommended pressure before use. They are designed to fit hubs with a 4-inch Pitch Circle Diameter (PCD). Hubs and stub axles compatible with this PCD and the 3.50x10 rim size may be required; these are sold separately.
Compatibility: Verify that your trailer's hub has a 4-inch PCD (imperial measurement). The center hole size is 67mm. These wheels are compatible with zero offset rims. Always check that the load and speed ratings meet your trailer's requirements.
Care: Regularly inspect the tires for wear, damage, and proper inflation. Keep the rims clean by washing with water and mild soap; avoid abrasive cleaners that could damage the powder coating. Store the wheels in a dry, protected area when not in use to prolong their lifespan.
