D Pro T Homeware Acoustic 3D Timber Oak Slatted Wall Panel End Trim Natural Décor - Light Walnut

The end trims are made from a high-quality, durable material with a wood grain finish that matches the D Pro T Homeware Acoustic Wall Panels.

Each end trim measures 2.6 meters in length.

These trims are specifically designed for D Pro T Homeware Acoustic Wall Panels and may not fit or match other brands. Compatibility is best ensured when used with the matching panel system.

They are typically installed by cutting them to size and adhering them to the edges of the acoustic panels using a suitable wood or paneling adhesive.

The dimensions of the end trims are 21mm x 30mm.

This specific product is for the Natural Décor - Light Walnut finish, designed to match the corresponding D Pro T Homeware Acoustic 3D Timber Oak Slatted Wall Panels.

A fine-tooth saw (hand or power) is recommended for clean cuts. A mitre box can be helpful for precise angles.

Ensure the wall panel edge is clean and flat. Check that the trim is the correct model for your D Pro T Homeware panels. If the wall surface is uneven, consider using a filler along the wall edge before applying the trim.

Ensure both the trim and the panel edge are clean and free from dust or debris. Use a high-quality adhesive specifically designed for wood and wall paneling. Allow adequate drying time for the adhesive according to its manufacturer's instructions.

Use a fine-tooth saw blade designed for wood or laminate. Support the trim firmly while cutting and consider using a mitre box for precise angles. Lightly sand the cut edge with fine-grit sandpaper if necessary.