Best current price£14.78from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£14.78Visit shop Draper 58564 Metal Bandsaw Blade 2460Mm X 1In 24Tpi Each
Visit shop
B&Q£21.98Visit shop B&Q - Metal Bandsaw Blade2460mm X 1"24Tpi 58564
Visit shop11 offers from £14.78 - £34.99
View price history by clicking the chart icon.
This Draper Tools metal bandsaw blade is designed for professionals and serious DIYers needing to cut ferrous and non-ferrous metals with precision. Its key benefit is the durable M42 high-speed cobalt steel teeth for extended life and efficient cutting. A potential caveat is that it's specifically for metal cutting and not suitable for wood or plastics.
| Model Part Number | 58564 |
|---|---|
| Brand | Draper Tools |
This blade is designed for cutting ferrous metals such as steel, alloy, and iron, as well as non-ferrous metals including aluminium, copper, and brass.
No, this blade is specifically designed for metal cutting and should not be used for wood or plastic materials, as it will perform poorly and could damage the blade or material.
TPI stands for 'Teeth Per Inch'. A 24 TPI blade has 24 teeth within each inch of the blade's length, which is suitable for cutting medium-thickness metals.
This blade has a length of 2460mm and a width of 1 inch. You should check your bandsaw's specifications to ensure it accommodates these dimensions.
After use, clean any metal chips from the blade and store it in a dry place. Regularly check and adjust blade tension to ensure optimal performance and longevity.
M42 high-speed cobalt steel is known for its exceptional hardness and heat resistance, which allows the blade to maintain its sharpness for longer periods, especially during demanding metal cutting applications.
Check for correct blade tension (not too tight or too loose), ensure the blade is running true on the wheels, and verify that the material being cut is compatible with the blade's TPI rating. Avoid forcing the cut.
Ensure the blade is installed correctly with teeth pointing forward. Check blade tension and alignment. Confirm that the guide rollers are properly adjusted and not worn.
Verify blade tension is adequate and consistent. Check that the bandsaw's blade guides are properly aligned and set close to the blade without binding.
Reduce feed rate; allow the blade to cut at its own speed. Ensure adequate lubrication if recommended for the material being cut (though this blade is designed for dry cutting). Check for excessive friction points.
Setup:
Compatibility:
Care:
