Simoniz Acrylic Gloss Black Paint - 500 mL

The Simoniz Acrylic Gloss Black Spray Paint is suitable for use on metal, plastic, ceramic, and wood.

Hold the can approximately 25-30 cm away from the surface during application.

Drying time varies depending on environmental conditions. Refer to the can for specific drying times and allow adequate time between coats.

While not always necessary, priming can improve adhesion, particularly on certain surfaces. Check the surface material and consider using a primer for optimal results.

For extra protection and a superior finish, applying a clear lacquer is recommended after the gloss black paint has completely dried.

Turn the can upside down and spray until only propellant comes out. If the nozzle remains clogged, try soaking it in solvent.

Use the paint in a well-ventilated area. Wear a respirator or mask to avoid inhaling fumes. Wear appropriate eye protection and gloves.

Apply thinner coats and ensure the can is held the correct distance from the surface. Avoid spraying too much paint in one area.

Ensure the surface is clean, properly prepared, and primed if necessary. Check for surface contamination.

Ensure the surface is completely dry and free of moisture. Apply paint in a well-ventilated area to allow solvents to evaporate properly.

Apply even coats, maintaining the correct distance from the surface. Multiple thin coats usually provide a better result than a single thick coat.