Best current price£113.79from www.pond-planet.co.uk
Shopping.co.uk recommended and popular offers
www.pond-planet.co.uk£113.79Visit shop Evolution Aqua K1 Micro Media
Visit shop
B&Q£118.95Visit shop B&Q - K1 Micro Filter Media 50 Litre
Visit shop5 offers from £113.79 - £118.95
View price history by clicking the chart icon.
The Evolution Aqua K1 Micro Media is designed for aquarium and pond filter systems, offering a highly efficient biological filtration solution. It provides a significantly increased protected surface area for beneficial bacteria, leading to superior ammonia and nitrite removal. Its unique self-cleaning motion minimizes maintenance, but it requires a properly functioning air pump to achieve optimal results.
| Brand | Evolution Aqua |
|---|
A general guideline is to fill 30-50% of your filter's biological chamber with K1 Micro media. The exact amount may vary depending on your filter design and the specific biological load of your aquarium or pond.
The unique design of K1 Micro provides a self-cleaning action. The constant movement in the filter helps to dislodge dead bacteria, so manual cleaning is rarely necessary. Only rinse if the media becomes excessively clogged, and always use dechlorinated water.
K1 Micro offers a significantly increased protected surface area per cubic meter, allowing for a much higher density of beneficial bacteria to colonize, leading to more efficient biological filtration.
It typically takes 3 to 6 weeks for beneficial bacteria to fully colonize the K1 Micro media and for the filter to reach its optimal biological efficiency. Avoid adding fish load too quickly during this maturation period.
While K1 Micro is designed for fluidized movement driven by air, it can be adapted for some gravity-fed systems if there is sufficient water flow to agitate the media and provision for aeration. However, optimal performance is achieved with dedicated aeration.
K1 Micro media is made from durable plastic and is designed to last for many years under normal operating conditions. It does not degrade or need regular replacement like some other filter media.
Ensure the air pump is adequately sized for the filter volume and that the air stones are clean and not blocked. Check for kinks or blockages in the airline tubing.
This is often a bacterial bloom. Allow the filter to mature for a few days. Ensure adequate water flow and aeration. Avoid overfeeding fish during this period.
Verify that the K1 Micro media has had sufficient time to colonize with beneficial bacteria (typically 3-6 weeks). Ensure the filter is not overloaded and that the aeration is consistent.
Ensure there is sufficient upward flow from the air pump to keep the media fluidized. Check for debris accumulation that might be hindering movement.
Setup: Rinse the K1 Micro media thoroughly with dechlorinated water before adding it to your filter. Ensure your filter design allows for the media to move freely. A minimum of 30-50% of the filter volume should be filled with K1 Micro for optimal performance. You will need an air pump connected to an air stone or diffuser placed at the bottom of the filter chamber to provide the necessary flow for the media to agitate.
Compatibility: K1 Micro is compatible with most types of bead filters, conventional pond filters, and aquarium filters that can accommodate moving media and have provisions for aeration. It is designed to work alongside other filter media.
Care: Due to its self-cleaning nature, K1 Micro requires very little manual care. Periodically check that the air pump is functioning correctly and that the media is moving freely. If the media appears clogged or flow is reduced, check for any blockages in the air line or stones. Unlike static media, deep cleaning is generally not required, preserving the vital bacterial colonies.
