Wirefy Heat Shrink Tubing - 1-1/4" - 3:1 Ratio - Adhesive Lined - Red - 50 Feet Roll
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Wirefy heat shrink tubing is designed for professionals and DIY enthusiasts needing a robust, waterproof seal for electrical connections. Its key benefit is the superior 3:1 shrink ratio and adhesive lining, ensuring a tight, secure, and insulated finish that 2:1 tubing often can't achieve. The primary caveat is the need for a heat source for activation, making it unsuitable for environments without one. This tubing offers marine-grade protection, easy application, and comes on a generous 50-foot roll.
All features
| Brand | Wirefy |
|---|
Extended Product Information
FAQs
What is the primary advantage of a 3:1 shrink ratio?
A 3:1 shrink ratio means the tubing can shrink down to one-third of its original diameter. This allows for a tighter, more secure fit, especially on irregularly shaped connections or when covering different wire gauges.
How does the adhesive lining work?
The internal adhesive lining melts when heat is applied. It then flows to create a waterproof seal around the connection and helps to bond the tubing securely, providing enhanced insulation and strain relief.
What type of heat source is best for applying this tubing?
A heat gun is the recommended tool for consistent and controlled heating. While a lighter can be used for small applications, it carries a higher risk of uneven heating, charring, or incomplete sealing.
Is this tubing suitable for outdoor or marine use?
Yes, the dual-wall construction with adhesive lining provides marine-grade resistance to moisture, salt, and other environmental factors, making it ideal for outdoor and marine applications.
Can I use this on very small wires?
The 3:1 ratio allows it to shrink considerably. However, for extremely thin wires, ensure the connection is properly supported before shrinking, or consider a smaller diameter tubing if available. Always check the specific dimensions.
How much tubing is on one roll?
Each roll contains 50 feet of heat shrink tubing.
What is the color of this specific tubing?
This particular tubing is red.
Troubleshooting
Tubing not shrinking evenly
Ensure heat is applied uniformly across the entire surface of the tubing. Move the heat source slowly and steadily.
Adhesive not sealing properly
Verify that the connection point is clean and dry. Ensure sufficient heat was applied to melt the adhesive. The tubing may need to be closer to the connection if the wire gauge is very small.
Tubing shrinking too much or collapsing
This is characteristic of the 3:1 ratio. For very delicate connections, ensure they are supported before shrinking or consider a lower shrink ratio tubing if available.
Tubing charring or burning
Reduce the heat temperature or distance of the heat source. Move the heat more quickly and evenly.
Pros and Cons
Pros
- Provides a significantly tighter and more secure seal due to the 3:1 shrink ratio.
- Waterproof and sealed connection thanks to the internal adhesive lining.
- Durable and resistant to environmental factors like moisture, heat, and chemicals.
- Easy and quick application process for professional results.
- Cost-effective for projects due to the long 50-foot roll.
Cons
- Requires a heat source (heat gun, lighter) for activation.
- The 1-1/4 inch (30mm) diameter might be too large for very small gauge wires.
- Can be difficult to reposition once the adhesive has melted.
- Minimum order quantities or specific lengths may not be available for very small needs.
Setup, Compatibility & Care
Setup:
- Select the Correct Size: Choose tubing with an internal diameter slightly larger than the connection you need to cover.
- Cut to Length: Cut the tubing to a length sufficient to overlap the connection by at least 1/2 inch on each side.
- Position Tubing: Slide the cut piece of tubing over the wire or connection point, ensuring it is centered over the area to be insulated.
- Apply Heat: Use a heat gun (recommended) or a lighter to evenly heat the tubing. Start from the center and move outwards. The tubing will shrink and the internal adhesive will melt, creating a seal.
- Allow to Cool: Let the connection cool completely before stressing or moving it.
Compatibility:
This tubing is compatible with most common electrical wire types and connectors. Its 3:1 shrink ratio makes it versatile for various connection sizes within its range. Ensure the heat source temperature does not exceed the tubing's maximum operating temperature.
Care:
Once properly installed, the heat shrink tubing requires no special care. Its durable construction is designed for long-term protection. Keep the unused portion of the roll in its original packaging to protect it from dust and moisture.