Hycote Touch Up Brush Paint - Silver - 37.5ml

Best current price£14.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£14.99Visit shop B&Q - Touch Up Brush Paint Volkswagen Reflex Silver (Metallic) 12.5Ml X3
Visit shop
Best current price£14.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£14.99Visit shop B&Q - Touch Up Brush Paint Volkswagen Reflex Silver (Metallic) 12.5Ml X3
Visit shop2 offers from £14.99 - £16.99
View price history by clicking the chart icon.
The Hycote Touch Up Brush Paint in Silver is designed for vehicle owners and DIY enthusiasts looking to repair minor cosmetic damage like scratches and stone chips on their car's bodywork. It offers an easy-to-apply solution that provides a durable, colour-matched finish with excellent resistance to fading and UV light. While it is perfect for small touch-ups, it is not intended for large-scale panel resprays, and users should ensure the surface is properly prepared to achieve a seamless blend with existing factory paint.
| Colour | Silver |
|---|---|
| Model Part Number | XCVW604 |
| Brand | Hycote |
| Container Volume | 37.5ml |
Yes, this paint is specifically formulated to be compatible with plastic surfaces.
While the paint is durable on its own, applying a clear coat over the top can provide extra protection and a higher gloss finish, especially for metallic paints.
While it is fast-drying, it is recommended to wait at least 2 to 4 hours to allow the paint to cure sufficiently before exposing it to road dust or moisture.
This is a cosmetic touch-up paint. It will cover the color of a scratch or chip but will not fill or level deep dents.
When stored in a cool, dry place with the cap tightened securely, the paint should remain usable for several years.
Ensure the bottle is shaken thoroughly for two minutes. Silver paint contains metallic flakes that must be evenly distributed to reflect light correctly.
You likely applied too much paint. Sand the area lightly with very fine-grit paper once dry and apply a thinner, more controlled layer.
The surface was likely contaminated with wax or grease. Clean the area thoroughly with an automotive degreaser and reapply.
Before you begin, shake the bottle vigorously for at least two minutes to ensure the silver pigments are fully suspended.