D-C-Fix Stone Memy Beige Self Adhesive Vinyl Wrap Film - 1M(L) 45Cm(W)
Dc fix sticky back plastic designs are so authentic, you will hardly believe it’s a vinyl film. Re...Dc fix sticky back plastic designs are so authentic, you will hardly believe it’s a vinyl film. Rejuvenate a worktop or wrap kitchen doors in minutes, customise furniture like drawer fronts or wardrobe doors. This vinyl can save you thousands on buying new, simply cover what you have.Dc fix is a non-permanent DIY solution, perfect for tenants or landlords looking for a quick fix, the vinyl can be removed fairly easy, use a hairdryer to warm the vinyl first and peel back, any leftover residue can be removed using warm soapy water.Dc fix has a water based low tack adhesive, this allows the vinyl to be repositioned during application, unlike stronger solvent based adhesives. Simply pull the vinyl back and start again. This vinyl has a 5 star rating for adhesion, lightfastness, shrinkage and durability. High Quality dc fix is our preferred brand of vinyl film due to its 5* rating for adhesion, opacity, lightfastness, shrinkage and durability.
This guide is for anyone looking to revitalize their furniture or surfaces with D-C-Fix Stone Memy Beige Self Adhesive Vinyl Wrap Film. It offers an easy, cost-effective way to update your space, saving you the expense of buying new items. Keep in mind that while it's repositionable during application, achieving a flawless finish requires careful attention to detail.
All features
Brand
d-c-fix
Extended Product Information
FAQs
Can I use this on a textured surface?
It is best used on smooth, flat surfaces. Textured surfaces may not allow for proper adhesion.
How long will the vinyl last?
With proper care and application, it can last for several years.
Is it waterproof?
It is water-resistant, but prolonged exposure to water may affect its longevity. Avoid excessive moisture.
Can I use it in a bathroom?
Yes, but make sure the surface is well prepared. Avoid direct contact with water.
Can the vinyl be removed easily?
Yes, it is designed to be removed with the help of a hairdryer, minimizing damage to the original surface.
What tools do I need?
You'll need a measuring tape, scissors or a utility knife, a smoothing tool (like a credit card), and possibly a hairdryer.
Troubleshooting
Bubbles or air pockets under the vinyl
Lift the vinyl and reapply, smoothing out the air pockets. Use a smoothing tool or credit card to work from the center outwards.
Edges lifting after application
Use a hairdryer to heat the edges and firmly press them down. Consider using an edge sealer.
Difficult to reposition
Ensure the surface is clean. If still difficult, slowly peel the vinyl back and reapply, paying attention to the initial placement.
Adhesive residue left behind after removal
Use warm soapy water to remove any remaining adhesive. A plastic scraper may help.
Pros and Cons
Pros
Cost-effective alternative to replacing furniture.
Easy to apply, even for beginners.
Repositionable adhesive allows for corrections.
Durable and long-lasting.
Realistic stone appearance.
Removable without causing significant damage.
Cons
Requires careful application to avoid bubbles and creases.
May require additional tools like a hairdryer for removal.
Surface preparation is crucial for optimal adhesion.
Edges may be prone to lifting over time if not properly sealed.
Not suitable for extremely high-heat environments.
Setup, Compatibility & Care
Surface Preparation: Clean the surface thoroughly. Remove any dirt, grease, or old adhesive residue. Ensure the surface is dry.
Cutting: Measure the surface and cut the vinyl film, leaving a small overlap.
Application: Peel off a small section of the backing and apply the adhesive side to the surface. Use a smoothing tool to eliminate bubbles and creases as you work your way across the surface.
Trimming: Trim any excess vinyl film using a sharp blade.
Compatibility: This vinyl is compatible with most smooth, flat surfaces. It is ideal for wood, laminate, and metal surfaces.
Care: Clean the surface with a damp cloth and mild soap. Avoid abrasive cleaners or excessive scrubbing. Do not use strong solvents.
Removal: To remove, gently heat the vinyl with a hairdryer and peel it off slowly. Use warm soapy water to remove any adhesive residue.